Avaya 4500 Technical Configuration Manual page 9


ERS-8300# config ip ipfix port <slot|port>?
Sub-Context:
Current Context:
all-traffic
flush [export-and-flush]
info
where:
Parameter
all-traffic
flush
hash-key
hash-polynomial
info
sampling-rate
<enable|disable>
Description
Enables or disables metering on all traffic.
Specifies that the records be flushed. You can export records
before flushing.
Enter a hash-key id from 1 to 4 or hashKeyOne | hashKeyTwo
|hashKeyThree | hashKeyFour.
Hash Key 1 – Use all bits of source IP (lower 20-bits), destination
IP (lower 19-bits), Protocol (1-5 bits), Source Port (lowever 10
bits), and Destination Port (lower 10 bits).
Hash Key 2 – Use lower 20-bits of source IP, lower 19-bits of
Destination IP, and lower 24 bits of protocol (8-bits), source port
(16-bits) and destination port (16-bits)
Hash Mask 3 – Use source IP (32-bits) and destination IP (32-
bits)
Hash Mask 4 – Use source IP (32-bits), source port (16-bits) and
destination IP (16-bits)
Default setting is hashKeyOne (1).
Specifies the coefficient and seed values. Note: If you do not
specify a coefficient, the default value (0x7cc) is used. If you do
not specify a seed value, the default value (0) is used.
Displays current configuration.
Configures the IPFIX sampling rate from 1 to 10,000 for every N
packets. The default setting is 1 for continuous monitoring.
Avaya Inc. – External Distribution
avaya.com
8