Operation And Controls - Teknetics Delta 4000 Owner's Manual

OPERATION and CONTROLS

NOTE: Immediately after powering on, your detector's unique 10-digit serial
POWERING UP
number is displayed once on the LCD. Two digits are displayed at a time; five
2-digit numbers are displayed in sequence. This 10-digit serial number is the
same serial number imprinted on the label inside the battery compartment.
Press
• The detector always starts in the DISCRIMINATION Mode.
Motion is required.
• Default sensitivity is at about 70% of maximum, (08).
• All target categories except iron are illuminated, meaning that all metal
objects will be detected except iron.
HOW TO WORK THE CONTROLS
POWER
ON/OFF
Press MODE button
to TOGGLE between
the Discrimination
and All Metal
Modes.
Press MENU button
to select the
menu item you
want to adjust.
10
Press and hold
the Pinpoint
button to
actuate PINPOINT
at any time.
Press or Buttons
to CHANGE THE SETTING
of the active menu item.
The active menu item is
the Highlighted line on the
left side of the display.