Vehicle Storage; Replacement Bulbs - Chrysler Cruiser PT 2010 Owner's Manual

342 MAINTAINING YOUR VEHICLE
CAUTION!
• When installing the Integrated Power Module cover,
it is important to ensure the cover is properly posi-
tioned and fully latched. Failure to do so may allow
water to get into the Integrated Power Module, and
possibly result in an electrical system failure.
• When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.

VEHICLE STORAGE

If you will not be using your vehicle for more than
21 days, you may want to take steps to preserve your
battery.
• Disengage the mini-fuse in the Power Distribution
Center labeled IOD (Ignition Off-Draw).
• Disconnect the negative cable from the battery.

REPLACEMENT BULBS

LIGHT BULBS – Interior
Center Console Floor Lamp . . . . . . . . . . . . . . . . . T37
Climate Controls . . . . . . . . . . . . . . . . . . . . . . 6233137
Console Gear Selector . . . . . . . . . . . . . . . . . . . PC194
Dome Lamp (Sedan) . . . . . . . . . . . . . . . . . . . . . T579
Instrument Cluster Illumination . . . . . . . . . . . . . . . 74
Overhead Reading Lamp (Overhead Console). . . T1037
Overhead Reading Lamp (Rearview Mirror) . . . . . T192
Rear Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . T906
Visor Vanity . . . . . . . . . . . . . . . . . . . . . . . . . 6501966
All the interior bulbs are brass or glass wedge base.
Aluminum base bulbs are not approved and should not
be used for replacement.
Bulb No.