Advertisement
Quick Links
Advertisement
Related Manuals for Zeutschel OMNISCAN 5000 TT A1
Summary of Contents for Zeutschel OMNISCAN 5000 TT A1
- Page 1 OMNISCAN 5000 TT A1 User‘s Manual TS - 312 / 09.01...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TS-312/09.01 page Introduction General description Safety instructions Installation Operation Maintenance... -
Page 3: Introduction
Then it can be written on a CD-ROM or transferred into a network. Optional, a laser-printer can be directly connected for immediate printout of a hard copy. Handling of books is convenient and easy: a well-designed ZEUTSCHEL book cradle guarantees that the book spines are not damaged, no shadow area appears at the book gutter and the script will appear without distortion. -
Page 4: General Description
General description: Description: High-Performance "Top light" Scanning System for books, newspapers and large format documents (maps, drawings, posters). Size of originals: 594 x 841 mm Scan head: High-resolution CCD line sensor, precision scan lens. field of depth approx. 50 mm / 2 inches, scan mode b&w, 16-, 256 grey-scales, electronic image correction of the book curve (software optional) Exposure control: Automatic control, manual threshold overrun. -
Page 5: Safety Instructions
Safety instructions: The scanner must only be operated with a single-phasing power supply of 230 V/50 Hz with separate protective conductor. Before operation the power supply must be checked by an authorised service engineer. If the local power supply does not meet the above mentioned requirements, please contact the manufacturer who will check if the scanner system can be operated under the existing power supply conditions. -
Page 6: Installation
Installation: OS 5000TT A1 - book scanner A1 Unpacking Carefully unpack the box consisting of: - scanner base unit including book cradle and scanner control unit - scanner column with scan head support (height adjustable) - top light lamp set lamp set - scanner head with built-in SCSI-interface pcb - cable, scan head - power supply unit - SCSI - cable, scan head - server pc (optional) - Page 7 Installation of the OMNISCAN 8.0x scanner software with DONGLE (optional) Install the optional SCSI-interface pcb ADAPTEC into the server-pc (only if not already pre-installed). Switch-on the scanner OS 5000TT A1. Switch-on the server-pc, while booting the OS 5000TT A1 has to identify itself at ID 5 with the name "ZEUTSCH. OMNISCAN".
- Page 8 OMNISCAN 5000 TT A1 1 - locking knob 2 - focus level 3 - book plate - left side 4 - book plate - right side 5 - top light 6 - column with scale 7 - locking knob - scan head height adjustment...
-
Page 9: Operation
Operation Instructions: Start of the scanner: - switch on the the main power switch of the scanner (1) - switch on the server-pc (2) - select scanning-software OMNISCAN 8.0x. (for details please see separate operation manual for scan-software OMNISCAN 8.0x) - all major scanning functions can be released with the function keys F2 to F11, the scan exposure also can be released via the optional foot pedal. - Page 10 The OS 5000TT A1 can be used in 2 different operation methods: 1. scanning all kind of documents with 400, 300, resp. 200 dpi resolution. max. scan area 400 dpi: DIN A3 (B-size) max. scan area 300 dpi: DIN A2 (C-size) max.
-
Page 11: Maintenance
Attention! Cleaning of optical parts should only by handled by trained service engineers and onyl with a soft, fine brush. Never use any solvents or liquids on the surface of optical parts. NOTE: In case of problems, please contact your ZEUTSCHEL-dealer or the ZEUTSCHEL service department for repair. Manufacturer: ZEUTSCHEL GMBH Heerweg 2 D-72070 Tübingen...