Use; The Basics Of Use - Miele KM 6357 Operating And Installation Instructions

Use

The basics of use

26
Your glass ceramic cooktop is equipped with sensors which
respond to touch.
When the cooktop is switched off, only the ON/OFF and
safety lock symbols are visible.
All the other symbols light up when the cooktop is switched
on. On the settings bars the 0 is displayed at brightness level
2 and the numbers 1-9 are displayed at brightness level 1.
When a power level is selected, all the numbers from 0 to the
selected power level are displayed at brightness level 2.
When the booster or the keeping-warm level is selected, the
respective sensors are displayed at brightness level 2.
To operate the cooktop, simply touch the desired sensors. An
audio signal confirms each touch of the sensor.
Take care to keep the control panel clean and do not
place anything on top of it. The sensors may not respond
or unintentional commands may be given, even causing
the cooktop to automatically switch off (see Safety
switch-off).
NEVER place hot cookware on the sensor areas. The
electronics underneath could get damaged.
Keep the control panel clean, do not place any objects on
it, and do not put hot cookware on it.