Lochinvar Sync 1.0 User's Information Manual
  1. Manuals
  2. Brands
  3. Lochinvar Manuals
  4. Boiler
  5. SYNC 1.0
  6. User's information manual
Lochinvar Sync 1.0 User's Information Manual

Lochinvar Sync 1.0 User's Information Manual

Hide thumbs Also See for Sync 1.0:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Operation & Installation Manual
User's Information Manual
Models: 1.0 - 1.3 - 1.5
WARNING:
If the information in these instructions is not
followed exactly, a fire or explosion may result causing property
damage, personal injury or death.
-- Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
-- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your
building.
• Immediately call your gas supplier from a near by phone.
Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
-- Installation and service must be performed by a qualified
installer, service agency, or the gas supplier.
Save this manual for future reference.
SYNC-USER Rev E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sync 1.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lochinvar Sync 1.0

Summary of Contents for Lochinvar Sync 1.0

  • Page 1 SYNC-USER Rev E User’s Information Manual Models: 1.0 - 1.3 - 1.5 WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. -- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

  • Page 2: Table Of Contents

    Contents HAZARD DEFINITIONS ............. 2 3. OPERATING INSTRUCTIONS ........9 PLEASE READ BEFORE PROCEEDING ......3 4. SMART TOUCH CONTROL MODULE 1. PREVENT COMBUSTION AIR CONTAMINATION ..4 SYNC Control Module ..........10 Status Screen ............10-11 2. MAINTENANCE SCHEDULE ........5 Maintenance Procedures ...........

  • Page 3: Please Read Before Proceeding

    User’s Information Manual Please read before proceeding Boiler service and maintenance – The SYNC Installation and Operation NOTICE Manual along with the SYNC Service • To avoid electric shock, disconnect electrical supply Manual are for use only by a qualified before performing maintenance.

  • Page 4: Prevent Combustion Air Contamination

    User’s Information Manual Prevent combustion air contamination If the boiler combustion air inlet is located WARNING Table 1A Corrosive Contaminants and Sources in any area likely to cause contamination, or if products which would contaminate Products to avoid: the air cannot be removed, you must have the combustion air and vent re-piped Spray cans containing chloro/fluorocarbons and terminated to another location.

  • Page 5: Maintenance Schedule

    User’s Information Manual Maintenance schedule Service technician Owner maintenance (see the SYNC Service Manual) (see pages 6 - 8 for detailed instructions) General: • Address reported problems, if any • Check boiler area • Inspect interior; clean and vacuum if Daily •...

  • Page 6: Maintenance Procedures

    User’s Information Manual Maintenance schedule Maintenance procedures Read the list of potential materials listed in Table 1A on page 4 of this manual. If any of these products are in the Boiler must be serviced and maintained room from which the boiler takes its combustion air, they must be removed immediately or the boiler combustion air (and vent termination) must be relocated to another The boiler must be inspected and started...
  • Page 7 User’s Information Manual Maintenance schedule (continued) Fill with fresh water until the water begins to pour out Use materials approved by the authority NOTICE of the drain. having jurisdiction. In the absence of other authority, PVC and CPVC pipe Replace the cap. Press the cap onto the trap until the must comply with ASTM D1785 or D2845.

  • Page 8: Check Air Vents

    User’s Information Manual Maintenance schedule Check air vents Have leaks fixed at once by a qualified WARNING service technician. Failure to comply could Reference FIG. 2-3 below. result in severe personal injury, death, or Visually inspect the vent to make sure that no leaks are substantial property damage.

  • Page 9: Operating Instructions

    User’s Information Manual Operating instructions FOR YOUR SAFETY READ BEFORE OPERATING WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. • A. This appliance does not have a pilot. It is Immediately call your gas supplier from a equipped with an ignition device which neighbor’s phone.

  • Page 10: Smart Touch Control Module

    User’s Information Manual SMART TOUCH control module SYNC control module The Status Screen displays boiler status, Cascade addresses, outlet water temperature, inlet water temperature, system temperature, and tank temperature. The boiler can be changed by pressing the ON/OFF button. The Details Screen and Main Menu Screen can be accessed by pressing the appropriate button.

  • Page 11: Details Screen

    User’s Information Manual SMART TOUCH control module (continued) Hot Water Tank Temperature - This is the temperature as Boiler Configuration - This line shows the current measured by the tank sensor in the hot water storage tank. configuration of the two control modules inside the unit. Time - The time is displayed in the upper right-hand corner Outlet Water Temperature - This is a calculated temperature of the display.
  • Page 12 User’s Information Manual SMART TOUCH control module Figure 4-2 Details Screen • Alarm - Is ON when a fault has been detected and the The Details Screen is accessed by pressing the DETAIL button alarm contacts are closed. Is OFF when the alarm on the Status Screen.
  • Page 13 User’s Information Manual SMART TOUCH control module (continued) Time - The time is displayed in the upper right-hand corner A blank message box is located on the Details Screen. This of the display. It is displayed in 24 hour format. Reference box will display various messages detailing the status of the the night setback parameters in the SYNC Service Manual for control module.

  • Page 14: Main Menu Screen

    User’s Information Manual SMART TOUCH control module Use the Main Menu Screen (FIG. 4-3) to access the screens necessary to set temperatures, operating conditions, and monitor boiler operation. The SYNC is equipped with a SMART TOUCH control system. All menu options are accessed by touching the screen with your finger or a stylus from a PDA.

  • Page 15: Notes

    Notes...

  • Page 16: Revision Notes

    Revision Notes: Revision A (ECO #C02428) initial release. Revision B (ECO #C04062) reflects changes to the terminology in all SYNC manuals and labels from module to heat exchanger (exception: control module). Revision C (ECO #C05672) reflects the change from automatic air vent to manual air vent.

This manual is also suitable for:

Sync 1.3Sync 1.5

Table of Contents