Craftsman 320.38596 Operator's Manual page 13

FORWARD/REVERSE
TOGGLE (Fig, 6)
The direction of rotation is
reversible and is controlled by a
toggle located on the auto ratchet
head. With the auto ratchet held
as shown in Fig. 6.
For forward rotation, set the
forward/reverse toggle to the
position marked "F." For reverse
rotation, set the forward/reverse
toggle to the position marked "R."
,_. WARNING: Never change the
direction of rotation when the tool
is operating.
ATTACHING AND
REMOVING THE SOCKET
1. Use only sockets of
appropriately fitting design,
within the recommended size
range of 3/8 in. to 7/8 in.
2. Set the lock switch at the
locked position.
3.
Fig. 6
Forward/Reverse Toggle
4.
Fig. 7
To attach the socket, hold the auto ratchet in the normal operating position,
as shown in Fig. 7.
Align the grooves on the socket with the raised ribs in the auto ratchet head.
From beneath the auto ratchet head (same side as the LED worklight), insert the
socket into the auto ratchet head as far as possible; you will hear a "click" to
indicate that the socket is locked in place (Fig. 7).
NOTICE: Make sure that the socket is locked at the same side of the tool as the LED
worklight so that the LED worklight can illuminate the working area.
5. To remove the socket, press it from the top of the auto ratchet head.
13