Panasonic WV-SPN6FRL1 Operating Instructions Manual page 8

Step 6 Insert the safety wire lug (camera accessory) to the rear
part of the IR LED unit, and fasten with screw A (accessory).
z
Take the safety wire lug from the rear
side of the camera facing the front side
and attach it to the IR LED unit as shown
on the illustration to the right.
x
Firmly fasten the safety wire lug to the
rear part of the IR LED unit with screw A
(accessory).
(Recommended tightening torque:
0.39 N·m {0.29 lbf·ft})
Step 7 Fasten the rear part of the IR LED unit from below with
screw A (accessory).
Firmly fasten the rear part of the IR LED unit
with screw A (accessory).
(Recommended tightening torque: 0.39 N·m
{0.29 lbf·ft})
8
Top side
Safety wire lug
(camera accessory)
Bottom side
Screw A (accessory)
Rear part of the
IR LED unit
Rear part of the
IR LED unit
Screw A (accessory)