Advertisement
Step 12 Configure the settings of the IR LED and perform an
operational check.
z
Select the [Front unit] tab on the [Extension unit] page of the setup menu.
Setup items
Automatic detection
Additional function
• When turning on the camera after the IR LED unit is installed, the IR LED unit will automati-
cally be recognized and [IR LED] will be displayed in the [Additional function] settings.
* "Off" is displayed if the unit fails to correctly recognize the IR LED unit.
Check again that the connectors of the IR LED unit and the camera are properly con-
nected and turn on the camera again.
x
Click [Image adjust] in IR LED.
c
Configure the settings according to your operation preferences when the image quality adjust-
ment screen (page 16) is displayed. For more information, refer to the Operating Instructions of
the camera.
Setup contents and defaults
Control whether or not to auto detect the IR LED Unit by select-
ing On/Off.
Default: On
Select an extension unit to use. This can only be done when
"Automatic detection" is turned "Off".
15
Advertisement
