UNITOR HPC 54/1 67/1
6 After using the cleaner
6.1
Switching off the
cleaner
6.2
Disconnecting supply
lines
6.3
Rolling up the hose and
storing of lance
6.4
Winding up the cable
20
O
B
A
1. Turn the main switch to posi-
tion „OFF".
2. Close water tap.
3. Squeeze the spray gun han-
dle until the cleaner is de-
pressurised.
4. Lock the safety catch on the
spray gun.
1. Remove the water hose from
the cleaner.
2. Pull out the plug from the
electrical socket.
Risk of tripping!
To prevent accidents, always
carefully roll up the hose.
1. Wind up the hose as illu-
strated.
2. Place the spray lance into
the spray lance storage.
1. Winding up the cable from
front over the fastening
screw (A) and clock-wise
around the cable hooks (B).
Options / model variants
1)
Original instructions