Fill Up Detergent Tank; Connecting The High Pressure Hose; Connecting The Water Supply - Wilhelmsen Ships UNTIOR HPC 54/1 Instruction Manual

UNITOR HPC 54/1 67/1
3.3

Fill up detergent tank

3.4 Connecting the high
pressure hose
3.4.1 Machines without high
pressure hose reel
3.4.2 Machines with high
pressure hose reel
(Not standard equipment!)
3.5 Connecting the water
supply
10
1)
NOTE!
The maximum length of
high pressure hose is 50 m.
A
C
B
1. Fill up detergent tank with
prediluted UNITOR deter-
gent.
2. Pull detergent hose and filter
out of the storage and put it
through the opening of the
detergent tank filler cap.
1. Put the quick connector of
the high pressure hose onto
the nipple on the cleaner.
1. Put the quick connector of
the high pressure hose (A)
onto the nipple on the axle.
2. Put the high pressure hose
into the hose guide (B) and
fix it with the clip .
1)
3. Release the brake (C) on the
hose reel guide and wind up
1)
the high pressure hose.
1. Rinse the water supply hose
briefly in order to prevent
sand and other dirt particles
entering into the machine.
2. Connect water supply hose
to the machine.
3. Open water tap.
Options / model variants
1)
Original instructions