Lifting With Crane - Wilhelmsen Ships UNTIOR HPC 54/1 Instruction Manual

UNITOR HPC 54/1 67/1
4.6

Lifting with crane

A
16
B
C
E
D
WARNING!
Do not stand under the
machine hanging in the
air.
1. Before crane lifting the
machine should be in
balance. Loosen the screw
(A), push the handle (B) a
little forward.
2. When the two marks are
aligned (C), the handle is in
crane-lifting -position.
3. Be carefull to fasten the
screw (D) in the lifting
position.
4. Wrap a belt strop around
center of the handle (E)
for the crane to hook in.
Options / model variants
1)
Original instructions