Setting The Clock - Whirlpool RF375PXY User Manual

Control knobs
There are two control knobs: the Oven
Selector and the Oven Temperature Control
Knob. The Oven Selector tells the oven
which mode you wish to cook in (Bake, Broil,
Time Bake), while the Oven Temperature
Control Knob lets you set a specific cooking
temperature. When using the MEALTIMER"
control you will use these knobs along with
command pads (see "Using the electronic
MEALTIMER" control" on page 18).
Command pads
The command pads tell the oven what to do
and in what order. A few examples:
-Clock/Set
tells the oven you are going to
set the clock.
-Off/Cancel
tells the oven or Minute Timer
to turn off.
Each command pad (except Off/Cancel and
Start/Enter) has its own Indicator Light. The
Indicator Light comes on when you touch the
command pad.
Setting the clock
1. Push
the Clock/Set pad. The colon
flashes and the previously set time of day
will light up in the display.
2. Use the Hour and Minute pads to set the
time of day.
Push
the "up" (A) or "down"
(V) pad(s) until the correct time shows in
the display.
3. Push the StarVEnter pad.
NOTE: If you do not want the clock time
displayed, push and hold the C&k/Set pad
for 4 seconds. To display the clock time
again, push the Clock/Set pad once, then
reset the clock time if necessary.
CLOCK
m
12