Table of Contents
Advertisement
If You Need Assistance
Or
sewice
This section is designed to help you save the cost of a service call. Part
1
of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
Consumer Assistance
Center for help or calling for service, please provide
a
detailed descrip
tion of the problem, your appliance's complete model and serial numbers and the purchase
date. (See
page 2.) This information will help us respond properly to your request.
1. Before
calling
for assistance
. . .
Petfonnance
problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. It could save you the cost of a
service call.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Nothing will
The power cord is not
Plug the power cord into a live circuit
operate
plugged into a live circuit with
with proper voltage. (See Installation
proper voltage.
Instructions.)
A household fuse has blown
Replace household fuse or reset
or
a
circuit breaker has
circuit breaker.
tripped.
The oven will
The Oven Selector is not
Turn the Oven Selector to the desired
not operate
turned to BAKE or BROIL.
setting.
A delayed start time has been
Wait for the start time to be reached.
programmed.
The Oven Temperature
Turn the Oven Temperature
Control
Control Knob is not turned to
Knob to
a
temperature
setting.
a temperature
setting.
The electronic MEALTIMER"
Set the MEALTIMER
control cor-
control is not set correctly.
rectly. (See "Using the electronic
MEALTIMER"
control" on page 18.)
The surface
A household fuse has blown
Replace household fuse or reset
units will not
or
a
circuit breaker has
circuit breaker.
operate
tripped.
Surface units are not plugged
Plug surface units in all the way.
in all the way.
(See "Replacing" on page 37.)
The control knobs are not
Push control knobs in before turning
being set correctly.
to a setting.
Contd
knob(s)
You are not pushing in before
will not turn
Push control knob(s) in before turning
turning.
to a
setting.
continued on next page
41
Advertisement
Table of Contents
