Setting The Display Format Output - LG LST-3410A Owner's Manual

Setting the Display Format Output

SELECT
DISPLAY FORMAT
otes
• Some monitors may not work
with some output resolutions.
• 1080i, 720p, 480p, and 480i
messages are displayed in the
display window instantly as they
are selected.
• As you operate the menu to first
highlight the desired output res-
olution and press SELECT, the
next menu in series appears
and the onscreen display
changes accordingly.
• Any dynamic display format
changes only work after the on-
screen display disappears.
Display Format Modes
1080i
720p
480p
480i (factory default)
native
variable 1
variable 2
variable 3
EZ DVI*
* In EZ DVI mode, the output display format is automatically adapted based on the preferred resolution format of the DVI-HDTV
monitor. The format may be converted from the original broadcast format.
* The EZ DVI mode is only available if a DVI-HDTV compatible monitor is connected to the HD DVR.
OUTPUT CONNECTION
COMPONENT VIDEO OUT
RGB OUT
DVI-HDTV OUT
VIDEO OUT (factory default)
S-VIDEO OUT
The HD DVR supports a variety of display formats. The DISPLAY FORMAT
button on the front panel changes the output connector and resolution. The
output resolution may be different from the original broadcast format.
Display Format Output Setup
Press DISPLAY FORMAT on the front panel once.
1
The current output connector's indicator flashes in the display window.
Depending on the type of monitor that the HD DVR is connected to,
2
press DISPLAY FORMAT repeatedly on the front panel to select
desired output connector. (YPbPr, RGB, DVI, or Video). (Skip this
step if you don't want to change output connection.)
Press SELECT on the front panel to confirm your output connector
3
selection.
The current output connector's indicator flashes in the display window.
Depending on the type of monitor that the HD DVR is connected to,
4
press DISPLAY FORMAT repeatedly on the front panel to select
desired output resolution. (1080i, 720p, 480p, 480i, native, variable
1, variable 2, or variable 3). (Skip this step if you don't want to
change output resolution.)
1080i, 720p, 480p, and 480i indicators are shown in the display window
and disappear after a short while or if another format key is pressed.
Press SELECT on the front panel to confirm your output resolution
5
selection.
Display Format setup is complete.
Input Signal Formats
all formats
all formats
all formats
all formats
1080i
720p
480p
480i
1080i
720p
480p/480i
1080i/720p
480p/480i
1080i/720p
480p/480i
all formats
AVAILABLE FORMATS
1080i/720p/480p/480i/native/variable 1/variable 2/variable 3
1080i/720p/480p/native/variable 1/variable 2/variable 3
1080i/720p/480p/native/variable 1/variable 2/variable 3
All formats converted to 480i
All formats converted to 480i
Output Signal Formats
1080i
720p
480p
480i
1080i
720p
480p
480i (YPbPr), 480p (RGB, DVI)
1080i
720p
480p
1080i
480p
720p
480p
changes according to monitor type
23