Table of Contents
Advertisement
3. Once connected, there will be a beep sound and the Bluetooth icon
will remain in solid blue. You can simply select and play any music
from your source device.
Speaker memory and reconnecting a device
BluTab can memorize up to 8 sets of paired device, when the memory exceed
this amount, the least-recently-paired device will be erased from the radio.
If your Bluetooth device already paired with the speaker previously, the
unit will memorize your Bluetooth device and it attempts to reconnect
with a device in memory which is last connected. If the last connected
device is not available, the speaker will be discoverable.
Switching to a different device
BluTab can connect two Bluetooth devices at once. You can switch
the speaker from your current connected device to another previously-
paired device by pausing one and playing the other. Please note that
the device you are switching to must be in the speaker memory.
Pairing and playing your device via NFC
Yo u r s p e a k e r i s e q u i p p e d w i t h w i r e l e s s N F C ( N e a r F i e l d
Communication) feature, allowing NFC-enabled devices to pair and play
the music with your BluTab. For non-NFC devices, please refer to the
above sections for standard Bluetooth pairing.
. Press and hold the Power button to turn on
the speaker. The Bluetooth status indicator
(
) on the speaker flashes fast flashing
blue to show the speaker is discoverable.
2. Turn on your NFC feature on your device.
GB
6
Advertisement
Table of Contents
