Table of Contents
Advertisement
2) If your Bluetooth-enabled device is temporarily disconnected to your
speaker. As long as the disconnection last within 0 minutes, your device
can re-connect with your radio again automatically. If the disconnection
last more than 0 minutes, then you need to manually reconnect your
device again to the radio. Be aware that during the period of disconnection,
no other Bluetooth device can pair or link with your radio.
3) If 'SANGEAN BLUTAB' shows in your Bluetooth device list but your
device cannot connect with it, please delete the Sangean BluTab item
from your list and pair the device with the speaker again following the
steps described previously.
4) Bluetooth/NFC connectivity performance may vary depending on the
connected Bluetooth devices. Please refer to the Bluetooth capabilities
of your device before connecting to your radio. All features may not
be supported on some paired Bluetooth devices.
5) The effective operation range between the system and the paired device
is approximately 0 meters (30 feet).
6) Any obstacle between the system and the device can reduce the
operational range.
Pairing additional devices
Before pairing another device to the speaker, you need to make the
speaker discoverable.
. Press and hold the Bluetooth/Call answer-hangup button (
Bluetooth status indicator (
2. Activate Bluetooth on your device according to the device's user
manual to link to the speaker. Locate the Bluetooth device list and
select the device named 'SANGEAN BLUTAB.' With some mobiles
which are equipped with earlier versions than BT2. Bluetooth device,
you may need to input the pass code "0000".
5
) blinks fast flashing blue.
), so the
Advertisement
Table of Contents
