SHERCO 2014 250 SEF-R Workshop Manual page 63

F- Updating the computer:
By using the diagnostic tool it is possible to make updates to the injection mapping (calibration). By using the diagnostic tool it is possible to make updates to the injection mapping (calibration). By using the diagnostic tool it is possible to make updates to the injection mapping (calibration).
An example would be the fitting of a racing silencer or there is an update from the factory. An example would be the fitting of a racing silencer or there is an update from the factory. An example would be the fitting of a racing silencer or there is an update from the factory.
These files will be freely available on sherconetwork (end 2013): s will be freely available on sherconetwork (end 2013):
You must pay attention to the model, the displacement You must pay attention to the model, the displacement, the type of silencer, etc.
In case of doubt, contact technical support. In case of doubt, contact technical support.
1- Download the desired update (file load the desired update (file.mot)
2- Power up the motorcycle
3-Click on the computer update
Confirm by clicking on this icon
Select the calibration file (.mot) that was previously downloaded and click
4- The file is being downloaded
) that was previously downloaded and click open. ) that was previously downloaded and click
the type of silencer, etc.
63/75