Maintenance And Service; Maintenance: Frequency And Tasks; Maintenance Tasks - Homeowner - Heat & Glo TIARAI-BK-IPI Owner's Manual

4

Maintenance and Service

Any safety screen or guard removed for servicing must be
replaced prior to operating the stove.
When properly maintained, your stove will give you many
years of trouble-free service. Contact your dealer to answer
questions regarding proper operation, troubleshooting and
service for your appliance. Visit www.heatnglo.com to locate
a dealer. We recommend annual service by a qualified
service technician.
A. Maintenance: Frequency and Tasks
Task Frequency
Glass Cleaning Seasonally
Remote Control Seasonally
Venting Seasonally
Gasket Seal Annually
and Glass
Inspection
Log Inspection Annually
Firebox Annually
Inspection
Control Annually
Compartment &
firebox Top
Burner Ignition Annually
& Operation
B. Maintenance Tasks - Homeowner
Installation and repair should be done by a qualified
service technician only. The stove should be inspected
before use and at least annually by a professional service
person.
The following tasks may be performed annually by the
homeowner. If you are uncomfortable performing any
of the listed tasks, please call your dealer for a service
appointment.
More frequent cleaning may be required due to lint from
carpeting or other factors. Control compartment, burner and
circulating air passageway of the stove must be kept clean.
CAUTION! Risk of Burns! The stove should be turned off
and cooled before servicing.
13 Heat & Glo • TIARAI-BK-IPI, TIARAI-BR-IPI, TIARAI-CES-IPI Owner's Manual • 2342-981_R11 • 08/15
To be completed by
Homeowner
Qualified Service
Technician
Glass Cleaning
Frequency: Seasonally
By: Homeowner
Tools Needed: Protective gloves, glass cleaner, drop cloth
and a stable work surface.
CAUTION! Handle fixed glass assembly with care. Glass
is breakable.
• Avoid striking, scratching or slamming glass
• Avoid abrasive cleaners
• DO NOT clean glass while it is hot
• Prepare a work area large enough to accommodate fixed
glass assembly and door frame by placing a drop cloth on
a flat, stable surface.
Note: Fixed glass assembly and gasketing may have
residue that can stain carpeting or floor surfaces.
• Remove safety barrier.
• Remove front casting by grasping it at the top and lifting up.
If the stove is already installed in a top vented configuration,
the top casting will need to be lifted slightly to accommodate
removal of the front casting. See Figure 4.1. Set front
casting aside on prepared work surface.
• Release both glass latches at the lower corners of the
appliance. Remove glass from appliance. See Figure 4.2.
TOP CASTING
FRONT CASTING
Figure 4.1 Remove Casting
GLASS LATCHES
Figure 4.2 Remove Glass Frame
SAFTEY BARRIER