Type 1B (Without T-Harness) - Xpresskit XK09 SoleX Series Installation Manual

The Mobile Integration Systems
Platform: XK09
Firmware: CHRYSLER Remote Start Ready Installation
Installation Type 1b (without T-Harness)
Important!
The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the XK09.
Neutral Safety Switch
Hood Pin
OR*
See page 5 for
wiring information
6
Connector side view
at ignition switch
12
Wires are listed by pin numbers. This display is not representative of connector pin layouts, which are often stacked.
*See Parking Lights wiring reference chart for the appropriate Parking Lights configuration.
LED
RX
(-) Ground
TX
(+)12v
XOVER
TX
(-) Ground
RX
(+) 12v
5: Blue: (-) Hood
9: Red: (+) 12 V
10: Black: (-)Ground
11: Black/White: (-) Parking Lights*
13: Violet/Brown: Parking Light MUX*
15: Yellow
16: Brown: (+) 12 V
17: Orange
19: Tan:HS CAN Low
20: Tan/Black: HSCAN High
1
7
XL202
Ignition
Barrel
Rev.: 20120210
Antenna
Programming
Button
The optional XL202 and
antenna are not included and
MUST be purchased separately.
(-) Driver door pin
Purple wire in
driver kick panel
4: -
3: -
2: Green: RAP OFF
1: -
Programming Button
© 2012 Directed. All rights reserved.
Page 4