Operation - Vibra ALC 3 Operation Manual

the pan ,hit the this key to clear the display
:
Use this key to subtract that the current weight readings is net weight.
VI.

Operation

(I) Backlight
Press key two times to show "Centr" and before it
disappear;
AUTO: press ,when the weight is over 5 divisions, the
1.
backlight will be switched on.
ON isplay backlight is on all the time.
: press , d
2.
OFF: press , display backlight is off.
3.
Note : the backlight will be stored and be confirmed when you turn
on the scale next time.
(II)Calibration
Press key two times to show "Centr" and before it
disappear, press , for example:
5000
Put on the weight of 5000g,it shows as follow when stable
5000.0
The calibration is finished.
Note: press numeric key to input the weight value, press
to confirm, press to clear the value, press
0
CAL
0
0
to exit.
4
(III)Recover the factory Set
Press
key to show "Centr" and before it disappear press
recover the factory set. Press
(IV) Preset Quantity
(1) Two methods of preset quantity
1. After get the sample(the unit weight window show the unit
weight),add the sample until the quantity meet the preset quantity.
2. Input the numeric key to preset the quantity
(2) Operation
After preset the quantity, press
Press
Press
Press
Press
Under this condition,
Press
Press
Press
Press
Under this condition,
key
Press
key to return the display to zero ,then press
to exit.
: : to exit.
: to show "Pr.AL –H ", that's high limit alarm
: to show "Pr.AL –L", that's low limit alarm
:to show "Pr. ALIN", that's between Hi & Li alarm
:to exit
: to show Hi, that's high limit value.
:to show Li, that's low limit value.
: to show "Pr. ALOU", that's beyond Hi or Li alarm.
:to exit
5
key to
to show "Pr.AL",