Audio And Video - D-Link DCS-6045L User Manual

Section 3 - Configuration
This section allows you to configure the audio and video settings for your camera.
Note: Please wait a few seconds for the camera to adjust the audio after making changes.
Video Profile: This section allows you to change the Resolution, FPS, and Quality.
Encode Type:
Your camera has separate settings for the H.264 and MJPEG video streams.
Resolution: Select the desired video resolution from three formats: 1280 x 720, 640 x 480,
and 320 x 240.
Bit Rate:
Higher settings offer better quality, but will require more bandwidth to stream.
Frame Rate: Select the frame rate(FPS) to use for the video stream. Higher settings offer
better quality, but will require more bandwidth to stream.
JPEG Quality: Select one of five levels of image quality: Highest, High, Medium, Low, and
Lowest.
Default View Select the default encoding to use when viewing your video on the Live Video
Mode:
page.
Day/Night Mode: If Auto is selected, the camera will automatically switch between day and night
mode. If Manual is selected, you can select Day Mode or Night Mode from
the Live Video page. Always Day Mode or Always Night Mode will cause the
camera to only operate in that mode. Day Mode Schedule will allow you to
specify periods of time when the camera should be in Day Mode, otherwise it
will operate in Night Mode.
Microphone: You can enable or disable the onboard camera microphone by checking this
option.
Volume:
If the microphone option is enabled, you can set the volume of the microphone
by selecting an option from the dropdown menu.
D-Link DCS-6045L User Manual

Audio and Video

33 33