Troubleshooting - D-Link DCS-6045L User Manual

Section 4 - Troubleshooting

Troubleshooting

1. What is Remote Access? How do I enable it?
Remote Access allows you to access your camera from any PC connected to the Internet through a web browser. This lets you view your camera
feed and manage your camera's settings when you're away from home.
To enable Remote Access, simply go through the Camera Installation Wizard included on the Installation CD that came in your package.
After going through the wizard, you should see Remote Status: Enabled on the summary page.
If you see Remote Status: Disabled, make sure that:
...the front LED on your camera is lit solid green
...your Internet connection is working
...your router's LAN & WAN connections are working properly
...your router has UPnP enabled (if your router does not support UPnP, please refer to Appendix A)
...your router can get a public IP
...your router is upgraded to the latest firmware
...you have tried rebooting your router by unplugging it, then plugging it back in
After checking the above items, you can click the Retry button to refresh the summary screen to see if Remote Access has been enabled.
2. What can I do if I forget my password?
If you forget your password, you will need to perform a hard reset of your camera. This process will change all your settings back to the factory
defaults.
To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 10 seconds while your camera is plugged in.
3. Why does the LED not light up?
The power supply might be faulty. Confirm that you are using the provided DC 5V power supply for this network camera. Verify that the power
D-Link DCS-6045L User Manual 49