D-Link DCS-6045L User Manual page 40

Section 3 - Configuration
Enable recording Check this box to enable the recording feature for video.
of video clip to SD
card:
Trigger by: Select whether the event is activated by Motion, Schedule, or if the video is Always
recording.
Always: This will enable continuous recording to the SD card.
Schedule: Click day and time for SD recording during a specified time.
Motion/Sound Enables SD recording after motion or sound is detected.
Detection:
File Format: You can select recording type for video. Video profile options are found under the
Audio and Video setup tab).
Recording Length:
You can set the recording time in minutes per file by selecting an option from the
dropdown menu. The camera will create individual files of the selected length
anytime the camera is actively recording.
SD Card:
You can set how much free space to keep in SD card and if recording should be
done cyclically or not.
Keep Free Space: Set the capacity of your local SD Card to prevent the system from becoming
unstable.
Cyclic: When this option is selected, it will cause the oldest snapshot/video files to be
deleted when the system requires storage space for new snapshot/video files.
Test SD Card: You can test the the SD card by clicking on the Test button. This will write a small
file to the card.
Click Save Settings to save your changes.
D-Link DCS-6045L User Manual 40 40