Advertisement
HOW TO WEIGH
1) Press "ON" to turn on the scale.
2) All the display segments will display "0". And the weighing indication "WT" will
occur on the top left hand corner, which means it's ready for weighing.
3) Place item slowly on the platform.
4) The value will show on the display.
HOW TO USE THE "ZERO" FEATURE
1) Press "ON" to turn on the scale.
2) Select measuring units (g/oz/lb:oz/ml).
3) Place one item on the scale.
4) Touch the "zero" key after the weight is stable. The weight of the item will be
removed and the display value will reset to zero.
5) Place another item to the scale. The display will show the weight of the item only.
6) You may continue to determine the weight of each additional item as they are
added by repeating step 4 and 5.
HOW TO CLEAR THE "ZERO" FEATURE?
Remove all items from the scale. A negative weight will appear on the display. Press
the "zero" key again to reset the scale to zero.
HOW TO DISPLAY NUTRITIONAL DATA
1) Make sure your scale is in WT mode. Press the "g/oz" WT key if necessary, and
"WT" will appear on the display.
2) Then place the item on the platform.
3) Find the 3‐digit food code from the list in this manual (below).
4) Use the number key to input the food code. The code number will show on the
left hand corner. (You can clear the input with the "CLR/MC" key.)
CAL – Calories content
SALT ‐ Salt content
PORT‐ Protein content
FAT‐ Fat content
CARB‐ Carbohydrates content
CHOL‐ Cholesterol content
FIBR‐ Fiber content
HOW TO SAVE NUTRITIONAL DATA
1) Follow the steps in HOW TO DISPLAY NUTRITIONAL DATA (above).
2) Press M+ to save the nutritional data.
3) The display will show M01 to indicate the first saved nutritional data.
4) Put another food and repeat the above operations. The display will show M02,
which means the total of nutritional ingredient for two foods have been saved.
4
Advertisement
