Introducing The Control Panel - Kellyco Explorer SE Quick Start Manual

14

Introducing the Control Panel

SHIFT BUTTONS
Pressing and releasing a shift button
next to an icon on the display will
select this option.
POWER
Turns the Explorer SE on/off and when
held for 2 seconds, restores factory
presets (pg. 18).
NOISE CANCEL
Automatically selects the quietest,
most stable channel for detecting
(pg. 56).
MENU
Brings up the MAIN MENU at any
stage of detector operation. This
allows access to the various settings of
the detector (pg. 38).
IRON MASK
Turns Iron Mask on/off, switching
between Iron Mask and using
Discrimination Patterns (pg. 34).
A black bar on the display above 'ON'
indicates Iron Mask is on. A black bar on
the display above 'OFF' indicates Iron
Mask is off.
Iron Mask is a basic Ferrous
Discrimination.
LCD (Liquid Crystal Display)
PINPOINT
Turns Pinpoint on / off (pg. 66).
A black and flashing bar on the LCD
above 'ON' indicates Pinpoint is on.
A black bar on the LCD above 'OFF'
indicates Pinpoint is off.
Pinpoint assists in locating the exact
position of a target prior to recovery.
15
BATTERY LIFE
Indicates the battery charge available
(pg. 72).
SHIFT BUTTONS
Pressing and releasing a shift button
next to an icon on the display will
select this option.
BACKLIGHT
The backlight provides greater screen
clarity in dim conditions. Even if it is
switched off, the backlight illuminates
for 1 second as the detector is
switched on. Turning this light off will
extend battery life. Contrast of the
LCD can be adjusted (pg. 55).
To turn the backlight on/off:
Press the BACKLIGHT button.
DETECT
Returns to the detect display
(Smartfind / Digital) at any stage of
operation, allowing you to continue
detecting. When in the detect display,
pressing DETECT will switch between
Smartfind and Digital (pg. 31).
BACK
'Retraces' your steps back through the
displays. This is useful to alter the last
adjusted setting. The BACK button
will retrace the last 3 steps (pg. 38).