Control Panel - Kellyco MPX Digital Owner's Manual

10
ASSEMBLY —
The detector is shipped fully assembled in one carton. Only two
adjustments are necessary, and no tools are required.
1.
Turn the search coil to the scanning position. It may be nec-
essary to loosen the knobs securing the coil and then tighten them
again. Make sure that the knobs are tightened (by hand) securely
after the search coil is positioned.
2. Install (2) 9 volt batteries and then the detector will be ready
for use. (See page 8.)
CONTROL PANEL —
LEVEL/SENSITIVITY INDICATOR
(See Page 8)
DEPTH
LOW
BATTERY
INDICATOR
(See Page 2 & 8)
3