Honeywell VISTA-20PSeries User Manual page 12

Functions of the Keypads
NOTE: The functions printed directly on
the keys indicate their primary purpose; the
functions printed under some of the keys
(shown in brackets under the respective
key), indicate their alternate or secondary
purpose.
1. DISPLAY WINDOW
Alpha Display Keypads: 2-line, 32-
character Liquid Crystal Display (LCD)
keypads that display protection point
identification, system
messages.
Fixed-Word
Display protection zone ID and system
status messages
words in the LCD display area.
2.
Disarms burglary portion of
1
OFF
system, silences
the
audible trouble indicators, and clears
visual display
correction.
[RECORD] On Voice keypads, used in
conjunction with the FUNCTION and
VOICE keys to record up to a 2.5-
minute message.
3.
Arms the entire burglary
2
AWAY
system, perimeter and interior.
[VOLUME] On Voice keypads, used in
conjunction with the FUNCTION and
desired volume control keys ↑ [3] or ↓
[6] to adjust the volume of a recorded
message or voice system status.
4. Arms perimeter portion of
3
STAY
burglary system
protection is not
movement within premises without
causing an alarm.
– 12 –
status, and
Display Keypads:
using pre-designated
alarms and
after problem's
only. Interior
armed, allowing
(cont'd)
[PLAY] On Voice keypads, used in
conjunction with the FUNCTION and
VOICE keys to play the recorded
message.
[ ↑ ] On Voice keypads, used in
conjunction with the FUNCTION and
VOLUME keys to raise the message
and voice system status volume.
5. Arms the entire burglary
4
MAX
system, perimeter and interior, but
without entry delay feature. Entering
via an entry/exit door will cause an
alarm.
6. Tests the system and alarm
5
TEST
sounder if disarmed. Refer to Testing
The System section for test procedures.
7. Removes
6
BYPASS
protection zones from being monitored
by the system.
[ ↓ ] On Voice keypads, used in
conjunction with the FUNCTION and
VOLUME keys to lower the message
and voice system status volume.
8. Arms in manner similar to
7
INSTANT
the STAY mode, but without the entry
delay feature.
Entering via an entry/exit door will
cause an alarm.
9. Used to assign additional user
8
CODE
codes for other users of the system.
10. 9
Turns CHIME mode on and
CHIME
off. When on, the opening of windows or
doors while the system is disarmed will
sound 3 beeps at the keypad(s).
individual