TP-Link TD-W8950N User Manual page 55

TD-W8950N
Rule Status: Select the status of the rule from the drop-down list to enable or disable the rule.

 IP Range: Enter a single IP address or a range of IP addresses.
 Port Range: Enter a single port or a range of ports.
 Protocol: Select a protocol type from the drop-down list. TCP, UDP and ALL are available
here.
 Priority: Select priority form the drop-down list. There are five options: Highest, 1, 2, 3, 4, 5, 6
and Lowest. The default precedence of the rule is 4.
 Upstream: Enter the min and max upload speed through the WAN port.
 Downstream: Enter the min and max download speed through the WAN port.
After completing the above configuration, click the Save/Apply button to make it take effect and
then you will see the following list as shown in Figure 4-48. If you want to modify the rule, click the
Edit button. If you want to delete the rule, check the Remove box first and then click the Remove
button.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-47
Figure 4-48
47