TP-Link TD-W8950N User Manual page 54

TD-W8950N
 Enable Bandwidth Control: Check this box to enable the Bandwidth Control function.
 Total Upstream Bandwidth (Kbps): Enter the upload speed through the WAN port.
 Total Downstream Bandwidth (Kbps): Enter the download speed through the WAN port.
 Save/Apply: Click this button to make the configuration take effect.

Note:
The Total Upstream Bandwidth and Total Downstream Bandwidth are required to be configured.
4.4.9.1 Rules List
Choose "Advanced Setup""Bandwidth Control" "Rules List" and then you will see the
screen as shown in Figure 4-46. This page allows you to view and configure TC rules.
To add a TC rule, click the Add button and you can configure it in the screen as shown in Figure
4-47.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-45
Figure 4-46
46