TP-Link TD-W8950N User Manual page 39

TD-W8950N
4.4.4.2 IPv6 LAN Config
Choose "Advanced Setup""LAN" "IPv6 LAN Config", and you will see the LAN screen
(shown in Figure 4-23), here you can configure LAN IPv6 interface for your modem router.
 Interface Address (prefix length is required): Here enter the prefix length of your interface
address.
 IPv6 LAN Applications: Select a type to assign IPv6 addresses to the computers in your
LAN. DHCPv6 Server and RADVD are provided.
For DHCPv6 Server:
1) If Stateless is selected, it doesn't need to be configured.
2) If Stateful is selected, please complete the following parameters.

Start interface ID: Enter a value for the DHCPv6 server to start with when issuing IPv6
addresses.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-23
31