Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL
HE250
(VB00002 model)
US ENVIRONMENTAL PROTECTION AGENCY
PHASE II CERTIFIED WOOD FIREPLACE
Listed to standards ULC-S610 and UL 127
www.occanada.com
Manufactured by:
Stove Builder International Inc.
250 rue Copenhague, Saint-Augustin-de-Desmaures (Quebec), Canada, G3A 2H3
After-sale service: 418-908-8002
E-mail: tech@sbi-international.com
READ AND KEEP THIS MANUAL FOR REFERENCE
This manual is available for free download on the manufacturer's web site. It is a copyrighted document.
Re-sale is strictly prohibited. The manufacturer may update this manual from time to time and cannot be
responsible for problems, injuries, or damages arising out of the use of information contained in any manual
obtained from unauthorized sources.
45704A
Printed in Canada
27-06-2019
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ventis HE250
Summary of Contents for Ventis HE250
- Page 1 INSTALLATION AND OPERATION MANUAL HE250 (VB00002 model) US ENVIRONMENTAL PROTECTION AGENCY PHASE II CERTIFIED WOOD FIREPLACE Listed to standards ULC-S610 and UL 127 www.occanada.com Manufactured by: Stove Builder International Inc. 250 rue Copenhague, Saint-Augustin-de-Desmaures (Quebec), Canada, G3A 2H3 After-sale service: 418-908-8002 E-mail: tech@sbi-international.com...
- Page 1 INSTALLATION AND OPERATION MANUAL HE250 (VB00002 model) US ENVIRONMENTAL PROTECTION AGENCY PHASE II CERTIFIED WOOD FIREPLACE Listed to standards ULC-S610 and UL 127 www.occanada.com Manufactured by: Stove Builder International Inc. 250 rue Copenhague, Saint-Augustin-de-Desmaures (Quebec), Canada, G3A 2H3 After-sale service: 418-908-8002 E-mail: tech@sbi-international.com...
- Page 2 THANK YOU FOR CHOOSING THIS VENTIS WOOD FIREPLACE As one of North America’s largest and most respected wood stove and fireplace manufacturers, Stove Builder International takes pride in the quality and performance of all its products. We want to help you get maximum satisfaction as you use this product.
- Page 2 THANK YOU FOR CHOOSING THIS VENTIS WOOD FIREPLACE As one of North America’s largest and most respected wood stove and fireplace manufacturers, Stove Builder International takes pride in the quality and performance of all its products. We want to help you get maximum satisfaction as you use this product.
-
Page 3: Table Of Contents
Ash Removal ..................... 19 4.4.3 Raking Charcoal ....................19 4.4.4 Firing Each New Load Hot ................. 20 4.4.5 Turning Down the Air Supply ................20 4.4.6 Building Different Fires for Different Needs ............21 HE250 - Installation and Operation Manual... -
Page 3: Table Of Contents
Table of content PART A - OPERATION AND MAINTENANCE ........6 1 Safety Information ................6 Summary of Operation and Maintenance Cautions and Warnings ......6 2 General Information on HE250 (VB00002) ........8 Appliance performance ..................8 General Features ....................9 Zone Heating and How to Make it Work for You ........... - Page 4 8.8.1 Universal Roof Support ..................57 8.8.2 Universal Offset Support ..................57 Installation Instructions for Masonry Application ........... 57 8.10 Supply of Combustion Air ..................58 8.10.1 Air Supply in Conventional Houses ..............59 HE250 - Installation and Operation Manual...
- Page 4 Offset Chimney Installation ................55 Angled Wall Radiation Shield ................57 Chimney Support Installation ................57 8.8.1 Universal Roof Support ..................57 8.8.2 Universal Offset Support ..................57 Installation Instructions for Masonry Application ........... 58 HE250 - Installation and Operation Manual...
-
Page 5: Ventis Limited Lifetime Warranty
Keep your sales invoice. We also recommend that you register your warranty online at http://www.occanada.com/en/service-support/warranty- registration Registering your warranty online will help us track rapidly the information we need on your unit. HE250 - Installation and Operation Manual... -
Page 5: Ventis Limited Lifetime Warranty
Keep your sales invoice. We also recommend that you register your warranty online at http://www.occanada.com/en/service-support/warranty- registration Registering your warranty online will help us track rapidly the information we need on your unit. HE250 - Installation and Operation Manual... -
Page 6: Part A - Operation And Maintenance
FINE PAPER, COLORED PAPER OR CARDBOARD, o SALT WATER DRIFTWOOD, o MANUFACTURED LOGS CONTAINING WAX OR CHEMICAL ADDITIVES, o RAILROAD TIES OR o LIQUIDS SUCH AS KEROSCENE OR DIESEL FUEL TO START A FIRE. HE250 - Installation and Operation Manual... -
Page 6: Part A - Operation And Maintenance
LIQUIDS SUCH AS KEROSCENE OR DIESEL FUEL TO START A FIRE. THIS APPLIANCE SHOULD BE MAINTAINED AND OPERATED AT ALL TIMES IN ACCORDANCE WITH • THESE INSTRUCTIONS. DO NOT ELEVATE THE FIRE BY MEANS OF GRATES, ANDIRONS OR OTHER MEANS. • HE250 - Installation and Operation Manual... - Page 7 “mobile home” as followed; Buildings built on fixed wheels and those transported on temporary wheels/axles and set on a permanent foundation. PLEASE NOTE THAT THE PICTURES SHOWN IN THIS MANUAL ARE GENERIC AND MAY NOT MATCH EXACTLY THE LOOK OF YOUR FIREPLACE. HE250 - Installation and Operation Manual...
- Page 7 WARNING: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov/ HE250 - Installation and Operation Manual...
-
Page 8: General Information
We also test using the same procedure except using split hardwood firewood to reflect real-world heat output. This fireplace is not intended to operate at its peak heat output continuously. *** East-west: through the door you see the sides of the logs. HE250 - Installation and Operation Manual... -
Page 8: General Information
2 GENERAL INFORMATION ON HE250 (VB00002) 2.1 Appliance performance Fuel type Dry cordwood Recommended heating area 500 to 2,100 ft (46 to 195 m Firebox volume 2.5 ft (0.071 m Maximum burn time Maximum heat output (dry cordwood) 75,000 BTU/h (22.0 kW) Overall heat output rate (min. - Page 9 8”/203mm HOT AIR GRAVITY DISTRIBUTION KIT (2) HE250 - Installation and Operation Manual...
- Page 9 CAN/CSA-Z240 MH standard. 8”/203mm HOT AIR GRAVITY DISTRIBUTION KIT (2) HE250 - Installation and Operation Manual...
- Page 10 6”/142mm FORCED AIR DISTRIBUTION KIT (3) HE250 - Installation and Operation Manual...
- Page 10 6”/142mm FORCED AIR DISTRIBUTION KIT (3) HE250 - Installation and Operation Manual...
-
Page 11: Zone Heating And How To Make It Work For You
2.2 Zone Heating and How to Make it Work for You Your new HE250 wood fireplace is a space heater, which means it is intended to heat the area it is installed in, as well as spaces that connect to that area, although to a lower temperature. This is called zone heating and it is an increasingly popular way to heat homes or spaces within homes. -
Page 11: Zone Heating And How To Make It Work For You
2.3 Zone Heating and How to Make it Work for You Your new HE250 wood fireplace is a space heater, which means it is intended to heat the area it is installed in, as well as spaces that connect to that area, although to a lower temperature. This is called zone heating and it is an increasingly popular way to heat homes or spaces within homes. -
Page 12: The Benefits Of Low Emissions And High Efficiency
2.3 The Benefits of Low Emissions and High Efficiency The low smoke emissions produced by the special features inside the HE250 firebox mean that your household will release up to 90 percent less smoke into the outside environment than if you used an older conventional stove. -
Page 12: The Benefits Of Low Emissions And High Efficiency
2.4 The Benefits of Low Emissions and High Efficiency The low smoke emissions produced by the special features inside the HE250 firebox mean that your household will release up to 90 percent less smoke into the outside environment than if you used an older conventional stove. -
Page 13: Fuel
Old, leaky cast iron stoves wouldn’t hold a fire overnight unless they were fed large pieces of hardwood. That is no longer true. You can successfully heat your home by using the less desirable tree species and give the forest a break at the same time. HE250 - Installation and Operation Manual... -
Page 13: Fuel
Old, leaky cast iron stoves wouldn’t hold a fire overnight unless they were fed large pieces of hardwood. That is no longer true. You can successfully heat your home by using the less desirable tree species and give the forest a break at the same time. HE250 - Installation and Operation Manual... -
Page 14: Log Length
Often, the firewood purchased from commercial suppliers is not split finely enough for convenient stoking. It is sometimes advisable to resplit the wood before stacking to dry. HE250 - Installation and Operation Manual... -
Page 14: Log Length
Often, the firewood purchased from commercial suppliers is not split finely enough for convenient stoking. It is sometimes advisable to resplit the wood before stacking to dry. HE250 - Installation and Operation Manual... -
Page 15: How To Dry Firewood
20% by weight and will allow • your fireplace to produce its highest possible efficiency HE250 - Installation and Operation Manual... -
Page 15: How To Dry Firewood
20% by weight and will allow • your fireplace to produce its highest possible efficiency HE250 - Installation and Operation Manual... -
Page 16: Judging Firewood Moisture Content
Start with one manufactured log and see how the fireplace reacts. Never use more than two manufactured logs at a time. HE250 - Installation and Operation Manual... -
Page 16: Judging Firewood Moisture Content
Start with one manufactured log and see how the fireplace reacts. Never use more than two manufactured logs at a time. HE250 - Installation and Operation Manual... -
Page 17: Operating Your Fireplace
Once the fire has ignited, close the door and leave the air control fully open. A conventional kindling fire with paper under finely split wood. HE250 - Installation and Operation Manual... -
Page 17: Operating Your Fireplace
A conventional kindling fire with paper under finely split wood. DO NOT LEAVE THE FIREPLACE UNATTENDED WHEN THE DOOR IS SLIGHTLY OPENED. ALWAYS CLOSE AND LATCH THE DOOR AFTER THE FIRE IGNITES. HE250 - Installation and Operation Manual... -
Page 18: The Top Down Fire
For example, the area temperature can be cooler when you are active, such as when doing housework or cooking, and it can be warmer when you are inactive, such as when reading or watching television. HE250 - Installation and Operation Manual... -
Page 18: The Top Down Fire
Do not attempt to produce a steady heat output by placing a single log on the fire at regular HE250 - Installation and Operation Manual... -
Page 19: Ash Removal
If you were to simply spread the charcoal out, the new load will smoulder for a long time before igniting. Remove ash first, and then rake charcoal towards the front of the firebox before loading so that it will ignite the new load. HE250 - Installation and Operation Manual... -
Page 19: Ash Removal
If you were to simply spread the charcoal out, the new load will smoulder for a long time before igniting. Remove ash first, and then rake charcoal towards the front of the firebox before loading so that it will ignite the new load. HE250 - Installation and Operation Manual... -
Page 20: Firing Each New Load Hot
With good fuel and correct air control use, the flames should slow down, but should stay large and steady, even as the air supply is reduced. HE250 - Installation and Operation Manual... -
Page 20: Firing Each New Load Hot
With good fuel and correct air control use, the flames should slow down, but should stay large and steady, even as the air supply is reduced. HE250 - Installation and Operation Manual... -
Page 21: Building Different Fires For Different Needs
You will need to fire the load hot for long enough to fully char the log surfaces before you can turn the air down. Make sure the fire is flaming brightly before leaving the fire to burn. HE250 - Installation and Operation Manual... -
Page 21: Building Different Fires For Different Needs
You will need to fire the load hot for long enough to fully char the log surfaces before you can turn the air down. Make sure the fire is flaming brightly before leaving the fire to burn. HE250 - Installation and Operation Manual... - Page 22 North-south loads break down more quickly, but much more wood can be loaded at a time. This makes north-south loading good for high output, long lasting fires for cold weather. HE250 - Installation and Operation Manual...
- Page 22 North-south loads break down more quickly, but much more wood can be loaded at a time. This makes north-south loading good for high output, long lasting fires for cold weather. HE250 - Installation and Operation Manual...
-
Page 23: Maintaining Your Wood Heating System
Visit your fireplace retailer to get the self-adhesive glass gasket and follow the instructions below for installation. Do not abuse the glass door by striking or slamming shut. Do not use the fireplace if the glass is broken. HE250 - Installation and Operation Manual... -
Page 23: Maintaining Your Wood Heating System
Visit your fireplace retailer to get the self-adhesive glass gasket and follow the instructions below for installation. Do not abuse the glass door by striking or slamming shut. Do not use the fireplace if the glass is broken. HE250 - Installation and Operation Manual... -
Page 24: Door Adjustment
5.1.4 Door Alignment To align, open the fireplace’s door and loosen the pressures screws located on the lower and upper hinges of the door using a 3/32” Allen key to free the adjustable hinge rods. HE250 - Installation and Operation Manual... -
Page 24: Door Adjustment
5.1.4 Door Alignment To align, open the fireplace’s door and loosen the pressures screws located on the lower and upper hinges of the door using a 3/32” Allen key to free the adjustable hinge rods. HE250 - Installation and Operation Manual... - Page 25 Using a flat screwdriver, turn the adjustable hinge rods in the direction shown to adjust the doors. Tighten all door hinge pressure screws when they are at the desired positions. HE250 - Installation and Operation Manual...
- Page 25 Using a flat screwdriver, turn the adjustable hinge rods in the direction shown to adjust the doors. Tighten all door hinge pressure screws when they are at the desired positions. HE250 - Installation and Operation Manual...
-
Page 26: Replacing The Door Gasket
Rond 1" (2,54 cm) The glass used in the HE250 is 5 mm thick of dimension: 25 3/8” x 13’’ and tested to reach temperatures up to 1400º F. If the glass breaks, it must be replaced with one having the same specification. Contact your Ventis dealer to obtain a genuine replacement part (see “replacement parts”, in appendix to get the proper... -
Page 26: Replacing The Door Gasket
Round 1" (2,54 cm) The glass used in the HE250 is 5 mm thick of dimension: 25 3/8” x 13’’ and tested to reach temperatures up to 1400º F. If the glass breaks, it must be replaced with one having the same specification. Contact your Ventis dealer to obtain a genuine replacement part (see “replacement parts”, in appendix to get the proper... -
Page 27: Cleaning And Painting The Fireplace
Even if creosote forms slowly in your system, the chimney should be cleaned and inspected at least once each year. Do not allow more than 1/8″ (3 mm) creosote buildup in the chimney. HE250 - Installation and Operation Manual... -
Page 27: Cleaning And Painting The Fireplace
Your new fireplace has the right characteristics to help you to burn clean fires with little or no smoke, resulting in less creosote in the chimney. HE250 - Installation and Operation Manual... -
Page 28: Cleaning The Chimney
4) Clean the inside of the firebox. 5) Re-install the baffle, the air tubes and the rain cap. CAUTION: OPERATION OF YOUR HE250 WITHOUT THE BAFFLE MAY CAUSE UNSAFE AND HAZARDOUS TEMPERATURE CONDITIONS AND WILL VOID THE WARRANTY. HE250 - Installation and Operation Manual... -
Page 28: Cleaning The Chimney
4) Clean the inside of the firebox. 5) Re-install the baffle, the air tubes and the rain cap. CAUTION: OPERATION OF YOUR HE250 WITHOUT THE BAFFLE MAY CAUSE UNSAFE AND HAZARDOUS TEMPERATURE CONDITIONS AND WILL VOID THE WARRANTY. HE250 - Installation and Operation Manual... -
Page 29: Fire Baffle Removal Prior To Cleaning The Chimney
5. Check outside to ensure that sparks and hot embers coming out of the chimney are not igniting the roof; 6. Do not use the fireplace again until your chimney and fireplace have been inspected by a qualified chimney sweep or a Fire Department Inspector; HE250 - Installation and Operation Manual... -
Page 29: Fire Baffle Removal Prior To Cleaning The Chimney
5. Check outside to ensure that sparks and hot embers coming out of the chimney are not igniting the roof; 6. Do not use the fireplace again until your chimney and fireplace have been inspected by a qualified chimney sweep or a Fire Department Inspector. HE250 - Installation and Operation Manual... -
Page 30: Part B - Installation
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE. • THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED IN A MOBILE HOME. • THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED INSIDE A MASONRY CHIMNEY. • HE250 - Installation and Operation Manual... -
Page 30: Part B - Installation
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE. • THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED IN A MOBILE HOME. • THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED INSIDE A MASONRY CHIMNEY. • HE250 - Installation and Operation Manual... -
Page 31: Regulations Covering Fireplace Installation
6.2 Regulations Covering Fireplace Installation When installed and operated as described in these instructions, the HE250 wood fireplace is suitable for use in residential installations. The HE250 wood fireplace is not intended for installation in a bedroom of a mobile home. -
Page 31: Regulations Covering Fireplace Installation
6.2 Regulations Covering Fireplace Installation When installed and operated as described in these instructions, the HE250 wood fireplace is suitable for use in residential installations. The HE250 wood fireplace is not intended for installation in a bedroom of a mobile home. -
Page 32: Locating The He250
6.3.1.1 Raised base installation of more than 4" (R value for the hearth extension not required) The HE250 may be installed directly on the floor or on a raised combustible or non combustible base. If the fireplace is elevated more than 4" (B), an R value for the hearth extension is not required. However, the upper and lower angle, for the full width of the floor protection, must be protected 2"... -
Page 32: Locating The He250
B. Usually, no additional floor support is needed for the fireplace. The adequacy of the floor can be checked by first estimating the weight of the fireplace system. Weight is given in Section 2.1: HE250 Specifications. Next, measure the area occupied by the fireplace, note the floor construction and consult your local building code to determine if additional support is needed. - Page 33 MINIMUM CLEARANCES MEASUREMENTS 80" (2032 mm) 2" (51 mm) 4" (102 mm) minimum HE250 - Installation and Operation Manual...
- Page 33 6.3.1.1 Raised base installation of more than 4" (R value for the hearth extension not required) The HE250 may be installed directly on the floor or on a raised combustible or non-combustible base. If the fireplace is elevated more than 4" (B), an R value for the hearth extension is not required. However, the upper and lower angle, for the full width of the floor protection, must be protected 2"...
- Page 34 HE250 - Installation and Operation Manual...
- Page 34 HE250 - Installation and Operation Manual...
- Page 35 In the case where (F) would be equal to 4", it is suggested that the sheet metal between the base of the fireplace and floor be in one piece. HE250 - Installation and Operation Manual...
- Page 35 In the case where (F) would be equal to 4", it is suggested that the sheet metal between the base of the fireplace and floor be in one piece. HE250 - Installation and Operation Manual...
- Page 36 (E) must be protected by a non-combustible material. For example, a sheet metal (not included). Note that the floor under of the fireplace should match or exceed the height of the floor protection. MINIMUM MEASUREMENT 2" (51 mm) HE250 - Installation and Operation Manual...
- Page 36 This is because R values are additive, whereas K values are not. To find the corresponding R factor to use for some selected materials, please see Thermal Characteristics of Common Floor Protection Materials table. CAUTION: DO NOT LEAVE CARPET UNDER THE FLOOR PROTECTION IN FRONT OF THE FIREPLACE HE250 - Installation and Operation Manual...
- Page 37 R by dividing the thickness of each material by its K value. Add the R values of your proposed materials as shown in the previous example. Example: K value = 0.75 Thickness = 1 R value = Thickness/K = 1/0.75 = 1.33 HE250 - Installation and Operation Manual...
- Page 37 R by dividing the thickness of each material by its K value. Add the R values of your proposed materials as shown in the previous example. Example: K value = 0.75 Thickness = 1 R value = Thickness/K = 1/0.75 = 1.33 HE250 - Installation and Operation Manual...
-
Page 38: Minimum Heart Extension Requirements
(not included). * On a raised base installation of more than 4", a non-combustible hearth extension floor area must extend at least 16" (406 mm) in front of the hearth. HE250 - Installation and Operation Manual... -
Page 38: Minimum Heart Extension Requirements
* Information as reported by manufacturers and other resources. ** For a 1/8" thickness. You cannot «stack» horizontal still air to accumulate R-values; you must separate each layer of horizontal still air with another non-combustible material. HE250 - Installation and Operation Manual... - Page 39 18" (457 mm)* 41.5" (1054 mm) 8" (203 mm) *On a raised base installation of more than 4", a non-combustible hearth extension floor area must extend at least 16" (406 mm) in front of the hearth. HE250 - Installation and Operation Manual...
- Page 39 8" (203 mm) on each side of the door opening (D). The joint between the hearth extension and the fireplace hearth needs to be made of non-combustible material such as sheet metal (not included). CLEARANCES 16" (406 mm) 41.5" (1054 mm) 8" (203 mm) HE250 - Installation and Operation Manual...
-
Page 40: Framing, Facing, Mantel, And Combustible Shelf
WARNING: THE FIREPLACE MUST NOT BE IN CONTACT WITH ANY INSULATION OR LOOSE FILLING MATERIAL. FOR THIS PURPOSE, COVER THE INSULATION WITH DRYWALL PANELS OR ANY OTHER FINISHING MATERIAL INSIDE THE CHASE AROUND THE FIREPLACE. HE250 - Installation and Operation Manual... -
Page 40: Framing, Facing, Mantel, And Combustible Shelf
THE FIREPLACE MUST NOT BE IN CONTACT WITH ANY INSULATION OR LOOSE FILLING MATERIAL. FOR THIS PURPOSE, COVER THE INSULATION WITH DRYWALL PANELS OR ANY OTHER FINISHING MATERIAL INSIDE THE CHASE AROUND THE FIREPLACE. HE250 - Installation and Operation Manual... - Page 41 1 3/8" (35 mm) MAX 5" (127 mm) 80" (2032 mm) *When drywall panels or any other finishing material inside the chase around the fireplace is to be used, add its thickness to the measurement. HE250 - Installation and Operation Manual...
- Page 41 1 3/8" (35 mm) MAX 5" (127 mm) 80" (2032 mm) *When drywall panels or any other finishing material inside the chase around the fireplace is to be used, add its thickness to the measurement. HE250 - Installation and Operation Manual...
- Page 42 *When drywall panels or any other finishing material inside the chase around the fireplace is to be used, add its thickness to the measurement. ** The fresh air intake kit and the forced air distribution kit may be installed either on the sides or on the back. HE250 - Installation and Operation Manual...
- Page 42 *When drywall panels or any other finishing material inside the chase around the fireplace is to be used, add its thickness to the measurement. ** The fresh air intake kit and the forced air distribution kit may be installed either on the sides or on the back. HE250 - Installation and Operation Manual...
- Page 43 **Values M and N are minimum measurements. They may need to be increased to alloy installation of a fresh air intake kit or forced air kit, or depending on the finish material used. CLEARANCES 3" (76 mm) maximum 5 5/8" (143 mm) minimum 24" (610 mm) minimum HE250 - Installation and Operation Manual...
- Page 43 **Values M and N are minimum measurements. They may need to be increased to alloy installation of a fresh air intake kit or forced air kit, or depending on the finish material used. CLEARANCES 3" (76 mm) maximum 5 5/8" (143 mm) minimum 24" (610 mm) minimum HE250 - Installation and Operation Manual...
- Page 44 52" (1321 mm) to the depth of your mantel shelf to obtain the safe positioning of your mantel shelf. For example, for a 9" (229 mm) mantel shelf, the safe positioning would be 61" (1549 mm) above the bottom of the fireplace 52" (1321 mm) + 9" (229 mm)). HE250 - Installation and Operation Manual...
- Page 44 52" (1321 mm) to the depth of your mantel shelf to obtain the safe positioning of your mantel shelf. For example, for a 9" (229 mm) mantel shelf, the safe positioning would be 61" (1549 mm) above the bottom of the fireplace 52" (1321 mm) + 9" (229 mm). HE250 - Installation and Operation Manual...
- Page 45 SHELF POSITIONING CLEARANCES 80" (2032 mm) 58" (1473 mm) 6" (152 mm) 60" (1524 mm) 8" (203 mm) 62" (1575 mm) 10" (254 mm) 64" (1626 mm) 12" (305 mm) HE250 - Installation and Operation Manual...
- Page 45 SHELF POSITIONING CLEARANCES 80" (2032 mm) 58" (1473 mm) 6" (152 mm) 60" (1524 mm) 8" (203 mm) 62" (1575 mm) 10" (254 mm) 64" (1626 mm) 12" (305 mm) HE250 - Installation and Operation Manual...
-
Page 46: Clearances To Combustible Material
In addition, you will find information about your fireplace (model, serial number, etc.). You can find the certification label under the fireplace, behind the bottom louver. HE250 - Installation and Operation Manual... -
Page 46: Clearances To Combustible Material
In addition, you will find information about your fireplace (model, serial number, etc.). You can find the certification label under the fireplace, behind the bottom louver. HE250 - Installation and Operation Manual... -
Page 47: The Venting System
HE250 - Installation and Operation Manual... -
Page 47: The Venting System
HE250 - Installation and Operation Manual... -
Page 48: Chimney Installation Notes
2. The HE250 is listed only with chimney systems described in table 1. 3. A chimney venting a fireplace shall not vent any other appliance. -
Page 48: Chimney Installation Notes
2. The HE250 is listed only with chimney systems described in table 1. 3. A chimney venting a fireplace shall not vent any other appliance. - Page 49 12. For installations where more than one chimney is located in the same non-chase or within the same area, we suggest that their terminations be separated by at least 16" (410 mm) horizontally, and 18" (460 mm) vertically. This separation is to prevent smoke migrating from one chimney to another. HE250 - Installation and Operation Manual...
- Page 49 11. Portions of the chimney which may extend through accessible spaces must be enclosed to avoid contact with combustible materials or damage the chimney. HE250 - Installation and Operation Manual...
-
Page 50: He250 - Installation And Operation Manual
18" 18" 457.2mm 457.2mm 18" 457.21mm 16" 16" 406.4mm 406.4mm HE250 - Installation and Operation Manual... -
Page 50: He250 - Installation And Operation Manual
16" (410 mm) horizontally, and 18" (460 mm) vertically. This separation is to prevent smoke migrating from one chimney to another. 18" 18" 457.2mm 457.2mm 18" 457.21mm 16" 16" 406.4mm 406.4mm HE250 - Installation and Operation Manual... -
Page 51: Chimney Installation Instructions
However, starting using a 30° or 45° elbow is also approved. Mandatory measure of 15 ft. from the bottom of the fireplace to the top of the outside chimney. HE250 - Installation and Operation Manual... -
Page 51: Chimney Installation Instructions
However, starting using a 30° or 45° elbow is also approved. Mandatory measure of 15 ft. from the bottom of the fireplace to the top of the outside chimney. HE250 - Installation and Operation Manual... - Page 52 Direct installation Exterior offset installation HE250 - Installation and Operation Manual...
- Page 52 Direct installation Exterior offset installation HE250 - Installation and Operation Manual...
- Page 53 4. Every time the chimney passes through a ceiling or a wall, install the appropriate firestop. When you reach the desired height, install the roof support (not illustrated). (Refer to instructions included with the support). HE250 - Installation and Operation Manual...
- Page 53 4. Every time the chimney passes through a ceiling or a wall, install the appropriate firestop. When you reach the desired height, install the roof support (not illustrated). (Refer to instructions included with the support). HE250 - Installation and Operation Manual...
- Page 54 8. When a ventilated roof flashing is installed, precautions are to be taken not to caulk or seal the ventilating openings. THE STRUCTURAL INTEGRITY OF THE FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED NOTE: THE FLOOR AND WALLS BELOW THE ATTIC MUST BE INSULATED USING THE SAME INSULATION. HE250 - Installation and Operation Manual...
- Page 54 8. When a ventilated roof flashing is installed, precautions are to be taken not to caulk or seal the ventilating openings. THE STRUCTURAL INTEGRITY OF THE FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED NOTE: THE FLOOR AND WALLS BELOW THE ATTIC MUST BE INSULATED USING THE SAME INSULATION. HE250 - Installation and Operation Manual...
-
Page 55: Offset Chimney Installation
5. From below, install a firestop supplied by the chimney manufacturer (see preceding figure). 6. A support must be used on the first 15' section (4.6 m). 7. Continue with the regular installation. TABLE 2 - LISTED CHIMNEYS FOR YOUR HE250 CHIMNEY BRAND... -
Page 55: Offset Chimney Installation
5. From below, install a firestop supplied by the chimney manufacturer (see preceding figure). 6. A support must be used on the first 15' section (4.6 m). 7. Continue with the regular installation. HE250 - Installation and Operation Manual... -
Page 56: Angled Wall Radiation Shield
Only one is required. Follow the chimney manufacturer’s installation instructions. In cold climate locations, it is recommended that you use the insulated wall radiation shield since it will maintain the home’s thermal barrier. INSULATED WALL RADIATION SHIELD GYPROCK INSULATED WALL HE250 - Installation and Operation Manual... -
Page 56: Angled Wall Radiation Shield
TABLE 2 - LISTED CHIMNEYS FOR YOUR HE250 CHIMNEY INNER BRAND TYPE MANUFACTURERS DIAMETER Olympia Chimney/ Ventis 1" Solid Pack 6" (15 cm) SBI Venting Division SBI Venting Division Nexvent 1" Solid Pack 6" (15 cm) Olympia Chimney Champion Chimney System 1"... -
Page 57: Chimney Support Installation
For connection at 30 or 45° angle, a special connector (B) must be used to connect the liner (C) to the insulated chimney (A). Verify availability and installation instructions for this connector with the chimney manufacturer. HE250 - Installation and Operation Manual... -
Page 57: Chimney Support Installation
Many manufacturers will provide the maximum height of chimney that can be supported by the support. Make sure you respect those parameters. HE250 - Installation and Operation Manual... -
Page 58: Supply Of Combustion Air
(CO) detector/alarm is required in the room in which the fireplace is installed. The CO detector will provide warning if for any reason the wood fireplace fails to function correctly. HE250 - Installation and Operation Manual... -
Page 58: Supply Of Combustion Air
The chimney must be relined with a Forever Flex or Hybrid stainless steel liner of the same diameter as the outlet of the fireplace. Only a connection at 30 ° or 45° angle is allowed. A special connector (B) must be used to connect the liner (C) to the insulated chimney (A). HE250 - Installation and Operation Manual... -
Page 59: Air Supply In Conventional Houses
Check the outdoor air duct for soot deposits when the full system is cleaned and inspected at least once each year. HE250 - Installation and Operation Manual... -
Page 59: Air Supply In Conventional Houses
12. To complete installation, secure the elbow or chimney section to the fireplace anchor plate.Note: Make sure the liner exceeds at least 12” (30 cm) the top of masonry chimney. CVA-UMA0630/ CVA-UMA0645 CACLF6/ CUCHF6 CVA-CPEC06 HE250 - Installation and Operation Manual... -
Page 60: Appendix 1: Optional Heat Distribution Systems Installation
APPENDIX 1: OPTIONAL HEAT DISTRIBUTION SYSTEMS INSTALLATION Different heat distribution systems can be installed with the HE250: • Hot air gravity distribution kit - Traditional style (AC01375) • Hot air gravity distribution kit - Modern style (AC01385) • Forced air distribution kit... -
Page 60: Appendix 1: Optional Heat Distribution Systems Installation
Check the outdoor air duct for soot deposits when the full system is cleaned and inspected at least once each year. HE250 - Installation and Operation Manual... - Page 61 68" (1.7 m) Minimum distance from ceiling: 12’’ (30 cm) Maximum length: 10' (3m) *The minimum height of the hot air ducting must be measured from the floor to the top of the hot air grilles. HE250 - Installation and Operation Manual...
- Page 61 APPENDIX 1: OPTIONAL HEAT DISTRIBUTION SYSTEMS INSTALLATION Different heat distribution systems can be installed with the HE250: • Hot air gravity distribution kit - Traditional (AC01375) • Hot air gravity distribution kit - Modern with adjustable pipes (AC01389) • Forced air distribution kit...
- Page 62 The hot air grilles can be installed in the same room as the fireplace, or one or both of the grilles can be installed in adjacent or upper rooms. Installing the ducts at different elevations will tend to exhaust more heat out of the higher grilles. HE250 - Installation and Operation Manual...
- Page 62 68" (1.7 m) Minimum distance from ceiling: 12’’ (30 cm) Maximum length: 10' (3m) *The minimum height of the hot air ducting must be measured from the floor to the top of the hot air grilles. HE250 - Installation and Operation Manual...
- Page 63 2. Secure the 6 steel brackets (B) with 6 screws provided (C) on top of the fireplace (3 for each ducting). Insert the ducting (A) (not provided) into each opening and secure it in place using the steel brackets (B) installed previously with 6 other self-tapping screws provided (C). HE250 - Installation and Operation Manual...
- Page 63 The hot air grilles can be installed in the same room as the fireplace, or one or both of the grilles can be installed in adjacent or upper rooms. Installing the ducts at different elevations will tend to exhaust more heat out of the higher grilles. HE250 - Installation and Operation Manual...
- Page 64 7. When passing through a combustible wall or floor, a firestop must be installed at the wall or floor penetration. The hole size must be in accordance with the duct manufacturer’s instructions. HE250 - Installation and Operation Manual...
- Page 64 2. Secure the 6 steel brackets (B) with 6 screws provided (C) on top of the fireplace (3 for each ducting). Insert the ducting (A) (not provided) into each opening and secure it in place using the steel brackets (B) installed previously with 6 other self-tapping screws provided (C). HE250 - Installation and Operation Manual...
- Page 65 12. The hot air outlet grilles must be installed with the louvers pointing downwards in order to prevent overheating adjacent ceilings. 13. Always install the two outlet grilles when using the hot air gravity distribution kit and blocking the upper louver of the fireplace. HE250 - Installation and Operation Manual...
- Page 65 7. When passing through a combustible wall or floor, a firestop must be installed at the wall or floor penetration. The hole size must be in accordance with the duct manufacturer’s instructions. HE250 - Installation and Operation Manual...
- Page 66 6 X steel brackets (D) with fastening screws (E) and 12 X self-tapping screws (F) 2 X Finishing cap assemblies (H) AND (J) 2 X Fastening screws (I) Parts not included in the kit: 2 X 8” rigid ducting (G) HE250 - Installation and Operation Manual...
- Page 66 12. The hot air outlet grilles must be installed with the louvers pointing downwards in order to prevent overheating adjacent ceilings. 13. Always install the two outlet grilles when using the hot air gravity distribution kit and blocking the upper louver of the fireplace. HE250 - Installation and Operation Manual...
- Page 67 DIMENSIONS OF HEAT DISTRIBUTION BOX: DIMENSIONS OF ASSEMBELED DECORATIVE PLATE: HE250 - Installation and Operation Manual...
- Page 67 Decorative plate (A) Adjustable frame (B) Heat distribution box (C) Telescoping section (D) Anchor plate (E) All screws are included Parts not included in the kit: 8” rigid ducting (if required according to the desired height). HE250 - Installation and Operation Manual...
- Page 68 1. It is recommended to wear gloves to perform this procedure. Remove the plates closing up the 8" dia. holes on top of the fireplace. Then, cut and remove the insulation in order to obtain two 8" dia. openings. Then, remove the plates closing up the 8" dia. holes inside the fireplace. HE250 - Installation and Operation Manual...
- Page 68 DIMENSIONS OF HEAT DISTRIBUTION BOX: DIMENSIONS OF ADJUSTABLE DECORATIVE PLATE: HE250 - Installation and Operation Manual...
- Page 69 4 screws into the heat distribution box. Set the decorative plate (G) to the adjustable frame (F) with fastening screws (I) and finishing cap assemblies (H) and (J) provided in the kit. HE250 - Installation and Operation Manual...
- Page 69 DIMENSIONS OF ASSEMBLED HEAT DISTRIBUTION BOX AND ADJUSTABLE DECORATIVE PLATE: DIMENSIONS OF TELESCOPING SECTION Min. HE250 - Installation and Operation Manual...
- Page 70 Forced Air Distribution Kit (not tested to EPA Standards) (AC01340) It is possible to connect a forced air distribution kit (AC01340) on the back or on either sides of the HE250. This kit allows distributing heat to another room up to 50 feet (15 m) of the fireplace. The insulated flexible pipe (not included in the kit) must be HVAC type pipe and must comply with ULC S110 and/or UL 181, Class 0 or Class 1 Standards and must withstand temperatures up to 250 °F.
- Page 70 (C) with 8 screws provided (B) on top of the fireplace (4 for each anchor plate). Insert the telescoping section (A) into each anchor plate and secure it with 6 other self- tapping screws provided (B). HE250 - Installation and Operation Manual...
-
Page 71: Appendix 2: Blower Maintenance Or Replacement
APPENDIX 2: BLOWER MAINTENANCE OR REPLACEMENT 1. Open the bottom louver (A). 2. With a short square head screwdriver, remove the 4 screws (C) holding in place the heat shield (B). HE250 - Installation and Operation Manual... -
Page 71: Appendix 2: Blower Maintenance Or Replacement
3 self-tapping screws provided. Insert the adjustable frame (D) in the heat distribution box (C), press it against the non-combustible finishing material and secure with 4 screws into the heat distribution box. Set the decorative plate (E) to the adjustable frame (D). HE250 - Installation and Operation Manual... - Page 72 3. Remove and keep the heat shield (B) and the 4 screws (C). 4. Cut the Tie wrap (D) HE250 - Installation and Operation Manual...
- Page 72 Forced Air Distribution Kit* (AC01340) It is possible to connect a forced air distribution kit (AC01340) on the back or on either sides of the HE250. This kit allows distributing heat to another room up to 50 feet (15 m) of the fireplace. The insulated flexible pipe (not included in the kit) must be HVAC type pipe and must comply with ULC S110 and/or UL 181, Class 0 or Class 1 Standards and must withstand temperatures up to 250 °F.
- Page 73 5. Unplug the blower’s electric wires (F) and (G). 6. Lift the blower (E) located under the firebox towards the back. 7. Turn 90° to pull out. Repeat the steps in reverse order to reinstall the fan. HE250 - Installation and Operation Manual...
- Page 73 APPENDIX 2: BLOWER MAINTENANCE OR REPLACEMENT 1. Open the bottom louver (A). 2. With a short square head screwdriver, remove the 4 screws (C) holding in place the heat shield (B). HE250 - Installation and Operation Manual...
- Page 74 Connect the black wire with the black wire of the terminal block. The ground (green or skinned wire) must be attached to the fireplace metal frame. HE250 - Installation and Operation Manual...
- Page 74 3. Remove and keep the heat shield (B) and the 4 screws (C). 4. Cut the Tie wrap (D). HE250 - Installation and Operation Manual...
-
Page 75: Appendix 3: Installing The Optional Door Overlay
APPENDIX 3: INSTALLING THE OPTIONAL DOOR OVERLAY In order to complete the assembly of your HE250 wood fireplace, you need to install the door overlay. See figure below for installation instructions: Position the overlay (A) and on the door frame and secure from the inside of the door using the 6 included screws (B) and bolts (C). -
Page 75: Appendix 3: Installing The Optional Door Overlay
Connect the black wire with the black wire of the terminal block. The ground (green or skinned wire) must be attached to the fireplace metal frame. HE250 - Installation and Operation Manual... -
Page 76: Appendix 4: Installing The Fresh Air Intake Kit
A 3” or 4” insulated flexible pipe (This HVAC type pipe must comply to ULC S110 and/or UL 181, Class 0 or Class 1 Standards and must withstand temperatures up to 250 °F. HE250 - Installation and Operation Manual... -
Page 76: Appendix 4: Installing The Fresh Air Intake Kit
APPENDIX 3: INSTALLING THE OPTIONAL DOOR OVERLAY In order to complete the assembly of your HE250 wood fireplace, you need to install the door overlay. See figure below for installation instructions: Position the overlay (A) and on the door frame and secure from the inside of the door using the 6 included screws (B) and bolts (C). - Page 77 If the location 2 or 3 has been chosen, use pliers to remove the knock- out. 2. Secure the fresh air intake kit adapter (B) on the fireplace jacket using the 4 screws provided with the kit. HE250 - Installation and Operation Manual...
- Page 77 A 3” or 4” insulated flexible pipe (This HVAC type pipe must comply to ULC S110 and/or UL 181, Class 0 or Class 1 Standards and must withstand temperatures up to 250 °F. HE250 - Installation and Operation Manual...
- Page 78 "P-Trap" loop. This configuration can be found inside the chase, but must at all times maintain clearances to combustibles. HE250 - Installation and Operation Manual...
- Page 78 If the location 2 or 3 has been chosen, use pliers to remove the knock- out. 2. Secure the fresh air intake kit adapter (B) on the fireplace jacket using the 4 screws provided with the kit. HE250 - Installation and Operation Manual...
- Page 79 For a better seal, you may also use aluminum tape. Wrap the tape around the joint between the flexible pipe and the air inlets. Carefully push the insulation and plastic cover back over the pipe. Fix the plastic in place using aluminum tape. HE250 - Installation and Operation Manual...
- Page 79 "P-Trap" loop. This configuration can be found inside the chase, but must at all times maintain clearances to combustibles. HE250 - Installation and Operation Manual...
-
Page 80: Appendix 5: Installing The Optional Fire Screen (Ac01560)
Lift the fire screen upwards and push the bottom part towards the stove then let the fire screen rest on the bottom of the door opening. Warning: Never leave the stove unattended while in use with the fire screen. HE250 - Installation and Operation Manual... -
Page 80: Appendix 5: Installing The Optional Fire Screen (Ac01560)
For a better seal, you may also use aluminum tape. Wrap the tape around the joint between the flexible pipe and the air inlets. Carefully push the insulation and plastic cover back over the pipe. Fix the plastic in place using aluminum tape. HE250 - Installation and Operation Manual... -
Page 81: Appendix 6: Installation Of Secondary Air Tubes And Baffle
(x4) Air tubes (x4) C-cast baffle (x1) Baffle insulation (x1) Baffle insulation weight (x1) 1. Using a ratchet key and a Torx (T-30), unscrew the two Torx screws (B) holding up the andiron (A). HE250 - Installation and Operation Manual... -
Page 81: Appendix 6: Installation Of Secondary Air Tubes And Baffle
Lift the firescreen upwards and push the bottom part towards the stove then let the firescreen rest on the bottom of the door opening. Warning: Never leave the stove unattended while in use with the firescreen. HE250 - Installation and Operation Manual... - Page 82 2. Remove the floor refractory slab (C). 3. Using a power screwdriver and hex tip 5/16", remove the slab holder left refractory slab (E). HE250 - Installation and Operation Manual...
- Page 82 (x4) Air tubes (x4) C-cast baffle (x1) Baffle insulation (x1) Baffle insulation weight (x1) 1. Using a ratchet key and a Torx (T-30), unscrew the two Torx screws (B) holding up the andiron (A). HE250 - Installation and Operation Manual...
- Page 83 5. Align the notch in the left end of the tube with the tab of the left air channel hole. HE250 - Installation and Operation Manual...
- Page 83 2. Remove the floor refractory slab (C). 3. Using a power screwdriver and hex tip 5/16", remove the slab holder left refractory slab (E). HE250 - Installation and Operation Manual...
- Page 84 The air tubes are identified for placement as follows: Model Type of tube HE250 fireplace Front ► 95 holes of 0.141" Middle front ► 67 holes of 0.125’’ Middle rear ► 67 holes of 0.109’’ Rear ► 67 holes of 0.101’’ HE250 - Installation and Operation Manual...
- Page 84 5. Align the notch in the left end of the tube with the tab of the left air channel hole. HE250 - Installation and Operation Manual...
-
Page 85: Appendix 7: Exploded Diagram And Parts List
APPENDIX 7: EXPLODED DIAGRAM AND PARTS LIST HE250 - Installation and Operation Manual... -
Page 85: Appendix 7: Exploded Diagram And Parts List
Then, install the two front tubes. 8. To remove the tubes use the above steps in reverse order. Note that secondary air tubes can be replaced without removing the baffle board. HE250 - Installation and Operation Manual... - Page 86 6" VENTIS ANCHOR PLATE 31 PL63766 HEADER STAND OFF 32 PL66500 TOP HEAT SHIELD 33 PL53065 REAR SPACER 34 PL63768 SIDE REAR SPACER 35 PL63767 SIDE FRONT SPACER 36 44046 THERMODISC F110-20F 37 99999 BUILD TO ORDER HE250 - Installation and Operation Manual...
- Page 86 If large cracks develop, then the refractory slabs should be replaced. To replace the refractory slabs, follow these steps: 1- Using a ratchet key and a Torx (T-30) socket, unscrew the two Torx screws (B) holding up the andiron (A). 2- Remove the floor refractory slab (C). HE250 - Installation and Operation Manual...
- Page 87 67 AC01375 AIR GRAVITY KIT - TRADITONAL STYLE 68 49066 90° X 8" 26Ga. GALVANISED ELBOW 69 30640 DISTRIBUTION GAKLVANISED BOX FOR HOT AIR GRAVITY KIT 8" 70 30540 DISTRIBUTION HOT AIR GRAVITY KIT GRILL HE250 - Installation and Operation Manual...
- Page 87 3- Using a power screwdriver and hex tip 5/16", remove the slab holders (D) and the refractory slabs (E) and (F). 4- Remove the rear refractory slab (G). To install new refractory slabs, follow the above steps in reverse. HE250 - Installation and Operation Manual...
- Page 88 If large cracks develop, then the refractory slabs should be replaced. To replace the refractory slabs, follow these steps: 1- Using a ratchet key and a Torx (T-30) socket, unscrew the two Torx screws (B) holding up the andiron (A). 2- Remove the floor refractory slab (C). HE250 - Installation and Operation Manual...
- Page 88 APPENDIX 8: EXPLODED DIAGRAM AND PARTS LIST HE250 - Installation and Operation Manual...
- Page 89 3- Using a power screwdriver and hex tip 5/16", remove the slab holders (D) and the refractory slabs (E) and (F). 4- Remove the rear refractory slab (G). To install new refractory slabs, follow the above steps in reverse. HE250 - Installation and Operation Manual...
- Page 89 31 PL63766 HEADER STAND OFF 32 PL66500 TOP HEAT SHIELD 33 PL53065 REAR SPACER 34 PL63768 SIDE REAR SPACER 35 PL63767 SHORT SIDE STANDOFF 36 44028 CERAMIC THERMODISC F110-20F 37 99999 BUILD TO ORDER HE250 - Installation and Operation Manual...
-
Page 90: Ventis Limited Lifetime Warranty
Paint (peeling), gaskets, insulation, firebrick, and ceramic fibre blankets. 1 year *Pictures required Shall your unit or a components be defective, contact immediately your VENTIS dealer. Prior to your call make sure you have the following information necessary to your warranty claim treatment: •... -
Page 90: Ventis Limited Lifetime Warranty
GAKLVANISED BOX FOR HOT AIR GRAVITY DISTRIBUTION KIT 8" 70 30540 HOT AIR GRAVITY DISTRIBUTION KIT GRILL 71 PL53026 AIR INTAKE BOX COVER 72 30154 BLACK SCREW #10 X 5/8" QUADREX #2 TYPE A 73 SE66579 REPLACEMENT HE250 HANDLE KIT HE250 - Installation and Operation Manual...
Need help?
Do you have a question about the HE250 and is the answer not in the manual?
Questions and answers