Starkey RIC 10 Operation Manual page 31

Multiflex Tinnitus Technology Operation
Tinnitus Stimulus Control
Your hearing system uses the multifunction
switch to control the tinnitus stimulus. Press
then release the switch until the desired
level is reached. Each press/release changes
the volume one increment.
Combined Volume or Multimemory
and Tinnitus Stimulus Control
If your hearing system is set up to adjust
volume and tinnitus stimulus, adjust volume
by pressing then releasing the switch until
the desired volume level is reached.
If your hearing system is set up to adjust
multimemory and tinnitus stimulus, adjust
memory by pressing then releasing the
switch until the desired memory is reached.
To adjust the tinnitus stimulus, press and
hold the switch. The hearing aid will cycle
through the tinnitus stimulus levels. Release
the switch when you are at the desired level.
31