ASSEMBLy iNSTRUCTiON
ASSEMBLING THE BLOWER TUBE
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
1. Align either of the grooves in
the tube with the tabs on the
blower housing. Push the tube
onto the blower housing until
the tab engages the grooves
(fig. 2).
2. Turn the tube in the direction
of the arrow until both of
Tab
Tube
the tabs slide into the lock
Groove
Fig. 2
positions (fig. 3).
Unlock
Lock
Fig. 3
Lock position
10