Table of Contents
Advertisement
OPERATiON
STARTING/STOPPING THE BLOWER (Fig.5)
• Ensure that the battery is installed in the blower
• To start the blower, press the On/Off Button located on the blower. You will hear two audible
beeps signaling the blower is active.
• Squeeze the trigger to start the blower.
• Release the trigger to stop.
ADJUSTING THE AIR VELOCITY (Fig.6)
• Ensure that blower is blower is on. The LED above the On/Off Button will illuminate.
• Press the Speed Selection Button to increase the air velocity to the desired setting.
Note:
The current speed setting will remain even if the unit is turned off.
OPERATING THE BLOWER
• To keep from scattering debris, blow around the outer edges of a debris pile. Never blow
directly into the center of a pile.
• To reduce sound levels, limit the number of pieces of equipment used at any one time.
• Use rakes and brooms to loosen debris before blowing. in dusty conditions, slightly dampen
surfaces when water is available.
• Conserve water by using power blowers instead of hoses for many lawn and garden
applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
• Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely
away.
• After using blowers or other equipment, clean up. Dispose of debris properly.
Trigger
Fig. 5
On/Off
Button
13
Speed Selection
Button
Fig. 6
Advertisement
Table of Contents
