Cisco Nexus B22HP Design And Deployment Manual page 23

Note:
required value in hexadecimal format.
10. Activate the Zone Sets.
N5548-Bottom(config-zoneset)# zoneset activate name zoneset1 vsan 200
N5548-Top(config-zoneset)# zoneset activate name zoneset2 vsan 201
The following commands can now be used to check connectivity between the blade
server and the Cisco Nexus B22HP.
N5548-Bottom# show flogi database
-------------------------------------------------------------------------------
INTERFACE
-------------------------------------------------------------------------------
vfc1032
Total number of flogi = 1.
N5548-Bottom#
N5548-Bottom# show fcns database
VSAN 200:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0x550000
Total number of entries = 1
N5548-Bottom#
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Use a relevant display command (for example, show interface or show flogi database) to obtain the
VSAN
200 0x550000
TYPE PWWN
N 10:00:b4:99:ba:fb:41:41
FCID PORT NAME
10:00:b4:99:ba:fb:41:41 20:00:b4:99:ba:fb:41:41
(VENDOR)
NODE NAME
FC4-TYPE:FEATURE
ipfc scsi-fcp:init
Page 23 of 41