GEN 5
You will have to specify the following settings:
"Key length" (for WEP networks only)
the authentication key can be 10 characters long (64bit) or 26 characters long
-
(128bit).
"Key format" (for WEP networks only)
in some cases you may need to change the key format in order to enter a pass-
-
phrase/password. See the documentation that came with your WiFi router or
modem.
"Key" (WEP or WPA)
type in the authentication key.
-
you will be taken to a virtual keyboard (see: Using the Virtual Keyboard ).
-
type in the key and tap on "
-
"Authentication" (for WEP networks only)
the network's authentication method can be based on an "
-
" or a "
fault)
Shared Key
it can be "
-
Automatic (DHCP)
if it is "
-
Automatic (DHCP)
Simply use the "
provided the signal is strong enough.
-
parameters will appear: the required information can be obtained from the person
who manages the network.
your ARCHOS will connect to this network, provided the signal is strong enough.
Filtered networks
your MAC address is, select the "Settings" menu item from the Home screen,
then choose "System". See: "System" Settings.
MANUAL
V3.0
OK
".
" or "
", then you do not have to enter any more information.
" button, and your ARCHOS will connect to this network,
Connect
CONNECTING TO A WIFI NETWORK > P. 47
".
Manual
Open System (de-
" setting. Other
Manual
" button, and
Connect