Canon Legria HF R66 Instruction Manual page 262

Trouble?
H List of Messages for Wi-Fi Functions
Refer also to the instruction manual of the access point and other
devices you will use.
Another user is already controlling the camcorder. Try again later.
- This message appears on the screen of the Wi-Fi device. Multiple
Wi-Fi devices are trying to connect with the camcorder. Make sure
only one Wi-Fi device is trying to connect and then touch Retry.
Cannot transfer files.
- There was a problem when transferring files to the optional CS100
Connect Station. Check if any errors have occurred with the con-
nect station. For details, refer to the instruction manual of the
CS100.
- Try turning off the camcorder and connect station. After a
moment, turn them on again and restore the connection. If the
problem persists, contact a Canon Service Center.
Closing the LCD panel turns off the camcorder. File transfers in
progress will be interrupted.
- Keep the camcorder's LCD panel open while a wireless file transfer
to the optional CS100 Connect Station is in progress.
Invalid port number. Perform the setting again.
- The port number entered cannot be used. In the settings for the
Monitor while Out function (A 175) change the port number to a
port that does not conflict with other devices.
IP address conflict
- Change the IP address of the camcorder or of any conflicting
device to avoid the same IP address being assigned to multiple
devices on the same network.
262