Canon Legria HF R66 Instruction Manual page 201

Wi-Fi Connection and Settings
3
Touch [OK] to save the configuration.
• If you were in the process of performing another procedure, the
camcorder will automatically connect to the access point. Return
to the procedure of the function you were previously using:
Step 6 in
(A 176)
Step 2 in
(A 193)
Step 2 in
• Otherwise, touch [K]
■
Searching for Access Points
After you touch [Search for Access Points], the camcorder will take a
few seconds to detect access points available in the vicinity and will dis-
play the first one. Make a note in advance of the network name (SSID)
and password (encryption key) of the access point you want to use.
(This will usually be the wireless router on your home network.)
To enter text for the various settings, use the virtual keyboard (A 179).
1
Select the desired access point.
• If the desired access point is not displayed, you can touch [Í] or
[Î] to go through the list of detected access points. You can
also touch [Search Again] to have the camcorder search for
access points again.
• When the network name (SSID) of the desired access point
appears, touch [OK].
Streaming via Wi-Fi and Internet (Monitor while Out)
Sharing Your Recordings Using Web Services
Wireless Playback on a Computer
>
[X] to close the menu.
201
(A 196)