Canon Legria HF R66 Instruction Manual page 196

The Camcorder's Wi-Fi Functions
• If no connections to access points have been saved in the cam-
corder, the message [Save the access point] will appear on the
screen. Touch [OK] to configure and save a new access point
connection (step 2 in
(A 198)) before continuing with this procedure.
2
Camcorder: When the wireless connection is successfully
established, [Connected] will appear on the camcorder's
screen.
• You can touch [View Information] to view the access point's
SSID, connection protocol, and the camcorder's IP address and
MAC address.
• After touching [View Information], you can touch [Change Con-
nection Point] to select a different SSID saved in the camcorder
in order to change access points.
3
Computer: Start your preferred media player software and
select your camcorder's model name from the list of media
servers.
• On standalone media players and other devices, connect the
device to the home network and select your camcorder's model
name from the list of media servers.
4
Computer: Select the folder for the camcorder's built-in
memory or memory card and play back the movies and pho-
tos.
5
Camcorder: Touch [End]
Wi-Fi Connection Using an Access Point
>
[OK] when finished.
196