22
en | Installation
Cable tree
Use the following table to identify the wires in the cable tree:
Wire color
Red
Brown
Yellow / Green
Black / Orange
White / Orange
White / Violet
Orange / Violet
Violet
White
(Shield)
Black
(Shield)
For connections use wires of at least the same thickness.
Power connection
1.
2.
3.
Network (and PoE) connection
1.
2.
Power is supplied to the camera via the Ethernet cable,
compliant with the Power-over-Ethernet standard.
AM18-Q0637 | v1.0 | 2012.12
Use a class 2 power supply 24 VAC or +12 VDC.
Connect the power wires (red+ , brown-) to the power
supply. (Isolate unused power wires individually.)
Connect the earth wire (yellow/green) from the camera to
the system earth of the installation to ensure correct EMC/
RFI and safety protection.
Use a shielded twisted pair (STP) Category 5e cable,
maximum length 100 meters.
Use the RJ45 female-to-female network cable connector to
connect the network cable of the system to the RJ45
connector of the camera (Auto MDIX compliant -
automatically detects the cable connection type).
Installation Manual
AWG
Signal
26
+12 VDC / 24 VAC
26
GND DC / 24 VAC
24
Earth
28
Alarm Out A
28
Alarm Out B
28
Ground (Alarm In)
28
Alarm In 1
28
Alarm In 2
28
Audio In
28
Ground (Audio In)
28
Audio Out
28
Ground (Audio Out)
FLEXIDOME HD VR
Bosch Security Systems