Technical Assistance; Limited Warranty - Honeywell COB01 Installation Manual

CB Scheme
Certified to CB Scheme IEC60950-1, Second Edition.
Cleaning the Charge-Only Base
Unplug the Charge-Only Base from the power supply before
cleaning.
Clean the housing of the Charge-Only Base with a soft cloth or tissue
dampened with water (or a mild detergent- water solution). If a
detergent solution is used, rinse with a clean tissue dampened with
water only.
Never use solvents (e.g., alcohol or acetone) on the
!
housing – solvents may damage the finish.

Technical Assistance

Contact information for technical support, product service, and repair
can be found at www.honeywellaidc.com.

Limited Warranty

Refer to www.honeywellaidc.com/warranty_information
product's warranty information.
Patents
For patent information, please refer to
patents.
Disclaimer
Honeywell International Inc. ("HII") reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.
www.honeywellaidc.com/
for your