Panasonic AJ-PX270 Operating Instructions Manual page 16

Description of Parts
19 <AUDIO LEVEL CH1>/<AUDIO LEVEL CH2> dial
Adjust the recording level of audio channel 1/2.
20 Internal speaker
Output audio during playback.
When connecting the headphones to the headphones terminal, audio from the speaker turns off
automatically.
21 HANDLE ZOOM switch
Select the operation of the zoom lever (handle side).
<FIX>: Zoom in/out with the speed set in the main menu → [SW MODE] → [H.ZOOM SPEED].
<VAR>: Zoom speed changes depending on how strong the lever is pushed. (When pushed gently, the
speed becomes slower, and when pushed strongly, it becomes faster.)
<OFF>: The zoom lever does not work.
22 <ND FILTER> switch
Select the filter to suit the illumination of the subject.
<1/64>: Reduce the amount of light entering the MOS sensor to 1/64.
<1/16>: Reduce the amount of light entering the MOS sensor to 1/16.
<1/4>: Reduce the amount of light entering the MOS sensor to 1/4.
<OFF>: Does not use the ND filter.
23 <IRIS> button
Select the method for adjustment of the lens iris.
24 <FOCUS ASSIST> button
Switch on/off the focus assist function.
This button can be used as the USER button (USER1).
25 <MACRO> button
Switch on/off the macro function of the focus.
This button can be used as the USER button (USER2).
26 <FOCUS> switch
Select the focus function.
<A>: Changes to the auto focus mode. Adjust the focus automatically.
<M>: Changes to the manual focus mode. Control the focus ring manually to adjust the focus.
<c>: Changes to the manual focus mode after the focus distance is set to infinity.
This is the spring switch. Even when the <FOCUS> switch is pushed towards the <c> side, the switch
returns to the <M> position.
27 <PUSH AUTO> button
When the button is pressed in manual focus mode, focus is adjusted automatically while it is pressed.
28 <OIS> button
Switch on/off the image stabilization function.
This button can be used as the USER button (USER3).
29 <ZEBRA> button
Select the display of either zebra of marker.
This button can be used as the USER button (USER4).
30 <WFM> button
Select whether to display the waveform monitor on the LCD monitor.
This button can be used as the USER button (USER5).
31 <A.IRIS.LEVEL> button
Switch on/off the auto iris function.
Set the target value of the auto iris level in the main menu → [SCENE FILE] → [A.IRIS LEVEL
EFFECT].
This button can be used as the USER button (USER6).
16