Description of Parts
Description of Parts
Left side
1
2
3
4
1 Focus ring
Focus manually when the <FOCUS> switch is set to <M>.
2 Zoom ring
Adjust the zoom manually when the <ZOOM> switch is set to <MANUAL>.
3 Lens cover switching lever
Open/close the lens cover.
4 Iris ring
Adjust the lens iris manually when the manual iris is set with the <IRIS> button.
5 <ZOOM> switch
Select the operation of the zoom.
<SERVO>: You can use the motor-driven zoom using the zoom lever.
<MANUAL>: You can operate the zoom ring manually to adjust the angle of view.
6 <DISP/MODE CHK> switch
This is the spring switch to check the status of the shooting, etc.
f Push this switch towards the <OFF> side to clear all displays except the display of the operation
status, frame display such as an area, counter, marker, and safety zone.
f Push this switch towards the <CHK> side to display all information such as setting status of the
functions for the shooting, the list of functions assigned to the USER buttons on the LCD monitor
during shooting stand-by or shooting. Each time the switch is pushed towards the <CHK> side, the
display of the status switches in turn.
14
20
5
7
9
6
8
24
22
21
23
26 27
11
13 14
10
12
25
28
29
30
31
15
16
18
17
19