Setting The Parameter Setup - Sherwood RD-606i Operating Instructions Manual

RD-606i(A)_ENG_110414_RD-606i(A)_ENG 2011-05-04 오후 2:13 페이지 47

SETTING THE PARAMETER SETUP

PARAMTER SETUP
• DOLBY PRO LOGIC II MUSIC PARAMETERS : To adjust the various Dolby Pro Logic II Music parameters for optimum
(PANORAMA, C.WIDTH(CENTER WIDTH),
DIMENSION)
• DRC DD(DYNAMIC RANGE COMPRESSION DOLBY DIGITAL) : To adjust the dynamic range compression that makes faint
• RETURN : To return to the previous menu.
When selecting "PANORAMA", "C.WIDTH", "DIMENSION"
• You can adjust the various Dolby Pro Logic II Music parameters for optimum surround effect.
■Note:
• The parameter settings are valid only when listening in Dolby Pro Logic II Music mode.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter.
2.
Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired.
■When selecting the "PANORAMA"
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall
imaging. Select "OFF" or "ON"(default value:OFF).
■When selecting the "C. WIDTH"(CENTER WIDTH) control
This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom
image, or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7 (default value : 3).
■When selecting the "DIMENSION" control
This gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from -3 to
+3 (default value : 0).
3.
Repeat the above steps 1 and 2 to adjust other parameters.
PANORAMA : OFF / ON
C.WIDTH : 3 / 0 ~ 7
DIMENSION : 0 / -3 ~ +3
DRC DD
DRC : OFF / MID / MAX
RETURN
RETURN
surround effect.
47
sound easier to hear at low volume levels.