Shelves And Bins - GE Monogram ZIPS360NHSS Owner's Manual

To remove the pan, pull out and then pull up on
Pan
pan.
removal
To replace the pan, extend both left and right
slides, place the pan back onto the slides; there
are hooks on the rear of the slides that the pan
edges will slide under. There is a bump on each
slide that will come through holes as you push
back on the pan. The front clip will engage on the
front of the slides to hold the pan in place.
Tempered glass shelves in the fresh food
Adjustable
compartment enable you to make efficient shelf
shelves in the
fresh food
needs.
compartment
To remove shelves: Tilt shelf up at front,
then lift it up and out of tracks on rear wall of
refrigerator.
To replace shelves: Select desired shelf height.
With shelf front raised slightly, engage top lugs
in tracks at rear of cabinet. Then lower front of
shelf until it locks into position.
Door
Some door bins are adjustable and can be
moved up and down to meet your storage needs.
bins
NOTE: The deeper door bins must be placed at
the bottom of the door only.
To remove: Lift the bin up and slide it toward you.

Shelves and Bins

Bottom Freezer Refrigerator
Hook
Bump and
hole
11