Motorola AP-7532 Installation Manual page 18

18
The LEDs provide a status display indicating error conditions, transmission, and network activity for the 5 GHz
802.11ac (amber) radio and the 2.4 GHz 802.11n (green) radio.
Task
Unconfigured On
Radio
Normal • If this radio band is enabled:
Operation
• If this radio band is disabled:
• If there is activity on this band:
Firmware On
Update
Locate AP LEDs blink in an alternating green, red and
Mode amber pattern using an irregular blink rate.
This LED state in no way resembles normal
operating conditions.
5 GHz Activity LED (Amber)
Blink at 5 second interval
Off
Blink interval at 1 time per second
2.4 GHz Activity LED (Green)
On
• If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per second
Off
LEDs blink in an alternating green, red and
amber pattern using an irregular blink rate.
This LED state in no way resembles normal
operating conditions
AP-7532 Access Point