Basic Access Point Configuration - Motorola AP-7532 Installation Manual

Table of Contents

Advertisement

Installation Guide
3

Basic Access Point Configuration

Once the AP-7532 is installed and powered on, complete the following steps to get the Access Point up and running
and access management functions:
1. The Access Point's IP address is optimally provided using DHCP. A zero config IP address can also be
derived if DHCP resources are unavailable. Using zero config, the last two octets in the IP address are the
decimal equivalent of the last two bytes in the Access Point's hardcoded MAC address.
For example:
MAC address -
Zero-config IP address -
To derive the Access Point's IP address using its MAC address:
a. Open the Windows calculator by selecting Start > All Programs > Accessories > Calculator. This menu
path may vary slightly depending on your version of Windows.
b. With the Calculator displayed, select View > Scientific. Select the Hex radio button.
c. Enter a hex byte of the Access Point's MAC address. For example, F0.
d. Select the Dec radio button. The calculator converts F0 into 240. Repeat this process for the last
Access Point MAC address octet.
2. Point the Web browser to the Access Point's IP address. The following login screen displays:
00:C0:23:00:F0:0A
169.254.240.10
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents