Modifying The Route; Replacing The Destination Of The Route; Setting A New Starting Position For The Route - Nextar q4 series Instruction Manual

3.4 Modifying the route

When navigation is already started, there are several ways to
modify the active route. The following sections show the
different options.

3.4.1 Replacing the destination of the route

It is easy to replace the destination of the active route. Select a
new destination as described before (starting at page 35), and
the route will be automatically recalculated to lead to the new
destination.
3.4.2 Setting a new starting position for the
route
For normal navigation, all routes are planned from the current
position. In order to check future routes, simulate them or see
their length in time and distance, you can turn off the GPS
receiver. Then you can set the starting point of the route to a
different location than the current GPS position.
1. If you are on the Map screen, tap
return to the Navigation menu.
2. In the Navigation menu, tap
.
83
to
, and then