Power Connection; Figure 3-1. Ac Inlet Location - Quanmax KPC-1910 Series User Manual

Power Connection

Connect the supplied the AC adapter to the system by inserting the DC connector of the adapter into DC
power inlet on the I/O panel of the system as shown. Secure the connector by tightening the knurled screw
on the DC connector
Connect the the AC power cord of the AC adapter to a corresponding AC outlet.
3-3 KPC-1910 Series User's Guide
DC power inlet

Figure 3-1. AC inlet location

Use the power cord suitable for the power supply in your
country.
Do not remove or alter the grounding prong on the power cord.
In situations where a two-slot receptacle is present, have it
replaced with a properly grounded three-prong grounding type
receptacle.
CAUTION
DC connector